Front wheel hub/front wheel help
- Thread starter Lorki
- Start date
jerrykap
VIP MEMBER
- Joined
- Jul 23, 2014
- Messages
- 236
I don't have one to spare, but I have a very poor condition front rim that I'm thinking of replacing. I think Buchanan's can pretty much drill and spoke a rim correctly but you'll probably have to find a suitable hub and axle? Perhaps the Matchless Parts Program in England can help?
jerrykap
VIP MEMBER
- Joined
- Jul 23, 2014
- Messages
- 236
My friend in England may be willing to sell his spare spindle but he would like to know your address so he can calculate postage. Please let me know .
C-ya, Jerry
p400
VIP MEMBER
- Joined
- Jul 14, 2014
- Messages
- 1,296
jerrykap
VIP MEMBER
- Joined
- Jul 23, 2014
- Messages
- 236
Wow! lorki needs to win this. Great find.
Hi.
I dont like so much the skimmed hubs.
I prefer the flanged one, but is very difficult to find the 1963 front “interim” hub.
On my P11A i have the flanged one (i know that someone can say that they are for 750 Ranger only!).
But, if you see pictures, you will find that most of the P11, P11A, P11A Ranger, mount skimmed and flanged.
Maybe they mounted what they found first on the chain?.
Piero
I dont like so much the skimmed hubs.
I prefer the flanged one, but is very difficult to find the 1963 front “interim” hub.
On my P11A i have the flanged one (i know that someone can say that they are for 750 Ranger only!).
But, if you see pictures, you will find that most of the P11, P11A, P11A Ranger, mount skimmed and flanged.
Maybe they mounted what they found first on the chain?.
Piero
Ron L
VIP MEMBER
- Joined
- Feb 27, 2004
- Messages
- 3,240
More likely the wheels were damaged and replaced using standard Matchless hubs. Since the skimmed hub was not used after the P11A, the stock of spare skimmed hubs was likely to have been scarce.
Regardless, if you like the look of ribbed hubs, by all means use them!
Ron L
VIP MEMBER
- Joined
- Feb 27, 2004
- Messages
- 3,240
You are planning on keeping those handlebars, aren't you?
