1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Fathers Day, stainless steel special

Discussion in 'Norton Commando Motorcycles (Classic)' started by cNw, May 9, 2019.

  1. cNw

    cNw VIP MEMBER

    Joined:
    Apr 16, 2009
    or Mothers day special since that’s coming up first

    As some of you may know, I recently bought the stainless hardware inventory for the Commandos from Bill Blake at Rocky Point Cycle. I ended up with some parts that I already offer versions of and decided to have a sale on some of the kits I got from Bill

    These kits will not be listed or available on my website, so you will need to contact me directly at the shop. Best is email as the phone usually goes to message

    nortonworks@fone.net

    All the parts are made in the USA. 316 Stainless. Single point cut threads (very nice as compared to some that are cut with a die). Bill sold these for many years with great results.I have 3 different kits available. While supplies last

    1. Complete head bolt kit. 5 bolts, 2 sleeve nuts, large 3/8 nut and two 5/16 nuts. All washers. Direct replacement for the head hardware. Retail $109.90. 40% off, now $ 65.00. SOLD OUT

    2. Complete 750 barrel stud and nut kit (9 studs). 7 each 3/8-16 x 3/8-24 studs and nuts plus 2 each 3/8-16 x 5/16-24 studs and nuts. All washers. Retail $ 114.90. 40% off, now 68.00

    3. Complete 850 barrel stud and nut kit (5 studs). 4 each 3/8-16 x 5/16-24 studs and nuts plus 1 each 3/8-16 x 3/8-24 stud and nut. All washers. Retail $ 62.90. 40% off, now 37.00

    On some engine cases there are blind holes that may be a bit shallower and you would need to remove some material on the coarse threaded portion in order to fit the stud all the way down to the shoulder

    AU2Y3595.JPG

    AU2Y3592.JPG

    Matt
     
    Last edited: May 16, 2019
    dougmatson and gortnipper like this.
  2. dougmatson

    dougmatson

    Joined:
    Nov 3, 2011
    Will call soon, so my wife will get this before Mother's day!
    Thanks Matt was wondering what to get her!!
     
    norton73, concours and speirmoor like this.
  3. RoadScholar

    RoadScholar VIP MEMBER

    Joined:
    Dec 28, 2008
    Just a quick note: These fasteners are made from 316, not 18-8.
     
  4. swooshdave

    swooshdave

    Joined:
    Apr 15, 2009
    Dammit, I just bought the head and barrel sets from Andover.
     
  5. cNw

    cNw VIP MEMBER

    Joined:
    Apr 16, 2009
    Bill,
    Thanks for the heads up. I was looking through your catalog and must have miss read it

    Matt
     
  6. cNw

    cNw VIP MEMBER

    Joined:
    Apr 16, 2009
    Swoosh....you know that that there will always be another Commando
     
  7. cNw

    cNw VIP MEMBER

    Joined:
    Apr 16, 2009
    Head bolt kits sold out as of May 16th.

    850 & 750 barrel kits still available

    Matt
     

Share This Page