Exhaust Headers for a Slimline/T140V build

Karl Johnson · Oct 1, 2024

Hi Folks,

In the process of completing my Slimline Triton build and can use some advice on exhaust headers. I have a T140v motor set up for push over pipes and BSA swept back headers. Not entirely happy with the aesthetics and overall "fit" with these. I'm wondering if anybody here has tried fitting a set of 650 Siamese exhaust, and if so where there are clearance issues with the frame? TIA

ashman · Oct 4, 2024

Why don't you get a set of headers made to fit your motor and Featherbed frame, find an exhaust maker with a Mandle bender.

Karl Johnson · Oct 4, 2024

Thanks, it does look as though I will end up going down that route, or develop some new skills and try fabbing them myself.

Fast Eddie · Oct 5, 2024

Dresda Autos have pre bent down pipes and pre made exhaust manifold pieces.

The idea being that you set them up on the bike to the required angles etc and then weld / braze the down pipes to the exhaust manifold piece.

So it’s a very easy way of getting ‘custom’ pipes.

They’ll also sell you the exhaust mounts, silencers and absolutely anything else you need for a Triton plus stuff you didn’t even know you needed !

Karl Johnson · Oct 14, 2024

Fast Eddie said:
Dresda Autos have pre bent down pipes and pre made exhaust manifold pieces.

The idea being that you set them up on the bike to the required angles etc and then weld / braze the down pipes to the exhaust manifold piece.

So it’s a very easy way of getting ‘custom’ pipes.

They’ll also sell you the exhaust mounts, silencers and absolutely anything else you need for a Triton plus stuff you didn’t even know you needed !

Hey thanks for the info. I'll check them out

seanalex · Oct 14, 2024

https://www.raysonsuk.com/product-page/triton-sweptback-exhaust-pipes

this is also a semi off the shelf possibility

Exhaust Headers for a Slimline/T140V build

Karl Johnson

ashman

Karl Johnson

Fast Eddie

Karl Johnson

seanalex

Similar threads