Exhaust Hangers.

Recently bought a late Mk.5 750. The silencer hangers are different. Normally there is a diamond shaped plate that bolts on to the rubbers, with the two middle holes for the silencer. On these, the rubbers are lower & the holes are set back 2" behind them, which makes the silencers sit 2" further back. The plate is a completely different shape. It looks correct, but gives the exhaust system a different length.
Wondering if this is right or could they be Interstate plates upside down?
Couldn't find anything in the parts book.

P.S.
Just looked on the RGM site, could be for black cap silencers?

Flo said:

Normally there is a diamond shaped plate that bolts on to the rubbers, with the two middle holes for the silencer.

Click to expand...

The diamond shape plates are for peashooters.



This is the black cap plate set (note that the three "peashooter" plates are all different to the three "black cap" plates so they need to be used as a set)

I definately have the ones in the photo. I have a spare set of the proper ones, so I will get them out & change them.
Thanks.