Dzus wire clips

Status
Not open for further replies.
The dzus "S" spring's p/n is S4-200. I guess the "S" stands for spring and the 4 stands for a 1/4 inch diameter stud and the -200 is the height in inches. It is actually .200 of an inch. Aircraft Spruce and Specialty sells these for 42 cents each. That is the cheapest I could find, here is a link:
http://www.aircraftspruce.com/catalog/hapages/springs2.php

You may also consider getting a S4-225 dzus "S" spring - it is a little bit taller (.225 inches high), so the dzus will snap in tighter. These are 52 cents each. At those prices I would get both sizes.
 
Guido said:
I've always wondered, (DZUS) is it a acronym?
Click to expand...

Actually it is the last name of the inventor, William Dzus, an American of Ukranian descent.
 
this part?
Dzus wire clips
 
I am always amazed at what I learn from this Forum!

Slick :

PS: I mean this sincerely....thanks, guys!
 
Thanks guys, the norton suppliers that I have talked to have the dzus with the circlip but dont come with the wire and dont sell separetly. Looks like aircraft spruce is the answer, dave
 
I dont know why you dont sit there with a pair of pointy nosed pliers and wire and make some, i did cos i couldnt find a source there and then... Dosnt have to be NASA quality spring steel cos it does next to nothing.. As long as the "peg" has not over worn its cam lobes it will be fine..

But then i dont count rivets....
 
I had my spring maker make a batch, the ones in the pic above out of stainless
I then CNC machined the sidecover bracket from 2mm stainless plate, then fitted with stainless
rivets, I think the op only wants the wire part.
 
Status
Not open for further replies.

Similar threads

jseng1
Dzus fastener
Replies
18
Views
992
L.A.B.
L.A.B.
Beaneater
Clip-on handlebars size?
Replies
8
Views
478
kernel65
kernel65
uneasy rider
Solenoid wire
Replies
3
Views
183
L.A.B.
L.A.B.
H
Magneto earth wire
Replies
4
Views
454
bmepkid
B
H
Atlas magneto earh wire
Replies
1
Views
173
kommando
kommando
Back
Top