Dominator oil tank banjo

I am working on a Dominator. I assume it is a 3-start oil pump though I will pull off the oil pump to make sure. It currently has the Commando style of oil feed to the rockers. However, there is a banjo on the oil tank return line to feed the rockers. It has been crimped shut. I believe if the oil pump is a three start I should use the low pressure oil feed to the rockers. Any problem with this logic? The crimp in the banjo does not leave me any room to install an oil line so it needs to be replaced. Andover Norton does not list this banjo. I looked under wideline and slimline frames. Any ideas?

Norvil has them as well.

Be advised, the original (as you can probably tell) has a step inside for centering. The RGM does not appear to, and the Norvil has no picture. I’d verify before ordering.

Thanks for the info. I will have to order one from RGM along with some other things.