Cush drive rubbersHi g

Status
Not open for further replies.
Joined
Aug 5, 2017
Messages
1,399
Country flag
Hi guys
Couple questions With regard to the Cush drive rubber blocks...
1. Thickest block on the load side?
2. Radiused corners of the blocks against the hub (away) from the drive pins
Thanks
 
And, in my experience, a little bit of rubber trimming may be needed unless you have a large press!
 
NAPA's Sil-Glyde (silicone lubricant) or equivalent is highly recommended.
 
Status
Not open for further replies.
Back
Top