Commando timing cover

seattle##gs · Mar 19, 2016

I am building a special and is there any commando timing cover with ignition running off the cam that does not have the Norton logo on it? Or is there anyway to sand it off or fill it in? The case will be very thin if I sand it off.

madass140 · Mar 19, 2016

I welded mine but it wasnt that successful so I painted the covers silver, you may have better luck than me, I bolted it to the case half before welding

seattle##gs · Mar 19, 2016

I see you have Maney cylinders...have you had any problem with oil leaks?

madass140 · Mar 19, 2016

they are Dunstall 810. I would of preferred Maney but I had this good set sitting on the shelf, regular torquing of the cylinder head initially

pierodn · Mar 20, 2016

madass140 said:
they are Dunstall 810. I would of preferred Maney but I had this good set sitting on the shelf, regular torquing of the cylinder head initially

Hi.
Which head gasket you have used with 810 Dunstall barrell?
Thanks.
Ciao
Piero

madass140 · Mar 20, 2016

modified copper head gasket

pierodn · Mar 21, 2016

madass140 said:
modified copper head gasket

Hi.
Modified means you have enlarged the holes for pistons?.
Thank you.
Piero

blacklav · Mar 21, 2016

Is that a stock filter box. Did you only have to reduce the width of the mesh?
Very neat.

madass140 · Mar 21, 2016

yes Piero just opened up the big holes and give it a coat of Hylomar
Narrow air filter element from RGM made it easy

Brooking 850 · Mar 21, 2016

Don whats the element number for the filter please, as I have this in mind for my Roadster with PWK copies, is it a K&N?
regards Mike

madass140 · Mar 21, 2016

NARROW VERSION OF COMMANDO AIR FILTER ELEMENT 67-74 (1.9")
Part No: '060673N'

Brooking 850 · Mar 21, 2016

ok thanks Don

Commando timing cover

Similar threads