Combat Cam
- Thread starter MichaelB
- Start date
- Status
- Joined
- Jul 17, 2015
- Messages
- 597
- Joined
- Jan 14, 2004
- Messages
- 2,448
Thanks Jim,
Measure with calipers from the base to the top, They are close. Look close too.
Here's a couple pics. It's either 6000 or 0009, the other number is 42 on another lobe.
No other markings.
According to DD's web site, Mega Cycle has 1/4 x 28 thread on the AA thread. This has 1/4 x 26.
It's probably stock or close to it. Reasonably sure it's not a Combat.
Measure with calipers from the base to the top, They are close. Look close too.
Here's a couple pics. It's either 6000 or 0009, the other number is 42 on another lobe.
No other markings.
According to DD's web site, Mega Cycle has 1/4 x 28 thread on the AA thread. This has 1/4 x 26.
It's probably stock or close to it. Reasonably sure it's not a Combat.
- Joined
- Dec 10, 2008
- Messages
- 7,253
MichaelB said:Thanks Jim,
Measure with calipers from the base to the top, They are close. Look close too.
Here's a couple pics. It's either 6000 or 0009, the other number is 42 on another lobe.
No other markings.
According to DD's web site, Mega Cycle has 1/4 x 28 thread on the AA thread. This has 1/4 x 26.
It's probably stock or close to it. Reasonably sure it's not a Combat.
It's definitely not a Megacycle. Megacycle does there cams on a new core with a different scrolling. They also hide there weld-up better.
It's likely someones hardweld copy of a standard cam.
Probably a very good cam, although with the high compression ratio of a Combat head and shorter duration it will be a bit picky on the fuels octane rating.
- Status
