Amal top cap & float bowl screws

Status
Not open for further replies.
Joined
Aug 5, 2017
Messages
1,399
Country flag
Hi all
I'm just installing one of Madass's marvellous carb modification kits... tightening the two inner screw is a real pain as you cant get a vertical drive on the screw heads..
So if a kind person could provide me the screw size & thread, I'll look into getting some hez headed bolts or cap headed screws
Thanks:)
 
2ba for both bowl and top cap screws, allen cap screws in stainless are available.
 
Can you get on the heads with micro ratchet with driver bit?
Amal  top cap & float bowl screws
 
As Kommando says 2BA. If you use Allen heads then a ball end Allen Key will get in at an angle. As you know use lock washers and a gentle nip up otherwise the body distorts and the slide will hang up.
 
You can use the short end of the allen key on the top screws, no problem. Dont know about with Don's kit tho, since mine have the standard cabling.
 
Status
Not open for further replies.
Back
Top