Fitted a centrestand.
I've had little success fitting centrestand springs using the "coins in spring" method in previous bikes, so went for a different system here (No "during" photos - sorry!)
Stand fitted with both bolts, and a bungee to hold it horizontal.
Spring hooked into cradle, and a hook tool at the other end, connected to a ratchet strap around the end of the swinging arm.
That pulled the spring, on the exact line of the hole in the stand, and it just dropped in without any problems...
The Access Norton Website uses cookies to keep you logged in if you register.
By continuing to use www.accessnorton.com, you are consenting to our use of cookies.