3rd gear layshaft bush

Status
Not open for further replies.

htown16

VIP MEMBER
Joined
Apr 29, 2009
Messages
1,481
Country flag
Need to install the bush in my new layshaft 3rd gear. The bush has holes in it and the gear has scrolling inside. How do I orient the bush?
 
The bush should be a sliding fit so it doesn't matter.
 
Should the bushes on all of the gears be sliding fits. They are all stuck in the gears at present. This bike was wrecked and I think it had very few miles on it(speedo missing). Apparently somebody drained the gearbox a long time ago as their was just a little dried up residue of lube in it. Should I press the bushes out and free them.
 
Layshaft 3rd and mainshaft 2nd should both be a sliding fit. Layshaft 1st should be tight.
 
Thanks guys. Took a bit of polishing the bush with fine emery paper but both of the ones in the scrolled gears are now a sliding fit.
 
Status
Not open for further replies.
Back
Top