2 into 1 into 2 centre stand for dunstall commando

Status
Not open for further replies.

pierodn

Joined
Nov 10, 2012
Messages
3,154
Country flag
Dear All,
i have never seen before the 2 into 1 into 2 centre stand for dunstall commando.
I would to buy one but if some one could post some photos, i could built it hand made.
I do not think it is like the original because i cannot understand how it works with the central down exhaust tube.
Ciao.
Piero
 
Thanks Les,
i have seen, very interesting, i think is possible to built like original or to modify also the standard, maybe.
Please again, i am looking for to buy the Dunstall Commando fairing mount, but no one sells it.
Have you some photos and misures so i can try to built hand made.
Best regards.
Ciao.
Piero
 
pierodn said:
Dear All,
i have never seen before the 2 into 1 into 2 centre stand for dunstall commando.
I would to buy one but if some one could post some photos, i could built it hand made.
I do not think it is like the original because i cannot understand how it works with the central down exhaust tube.
Ciao.
Piero
Click to expand...

No, it certainly is not like the original/stock settup. Be aware that that the centerstand itself mounts to plates that are themselves mounted to the engine and front isolastic with through bolts. That being said, this moves the centerstand forward. That means the rear wheel doesn't come off the ground like it does in a stock settup. I run the Dunstall and it's not the easiest thing in the world to adjust the chain on the road. Sure like the sound/looks of the exhaust though.
 
From deep in my picture archives....

Fairing setup
2 into 1 into 2 centre stand for dunstall commando


Center stand
2 into 1 into 2 centre stand for dunstall commando
 
Nice. I'll have to take pictures the next time I remove the centerstand. Geting tempted to go stock.
 
I've been thinking on my special the rump link fouls center stand to put a 2nd side stand on so if both side down it holds front or rear tire off surface a bit for road side flats.
 
850cmndo said:
pierodn said:
Dear All,
i have never seen before the 2 into 1 into 2 centre stand for dunstall commando.
I would to buy one but if some one could post some photos, i could built it hand made.
I do not think it is like the original because i cannot understand how it works with the central down exhaust tube.
Ciao.
Piero
Click to expand...

No, it certainly is not like the original/stock settup. Be aware that that the centerstand itself mounts to plates that are themselves mounted to the engine and front isolastic with through bolts. That being said, this moves the centerstand forward. That means the rear wheel doesn't come off the ground like it does in a stock settup. I run the Dunstall and it's not the easiest thing in the world to adjust the chain on the road. Sure like the sound/looks of the exhaust though.
Click to expand...

Ciao Piero, I have one for sale here in Australia. Fammi sapere se ti interessa. John
 
I'd be interested in their worth seeing as I have the entire setup, to include thru bolts etc...
 
I am also looking for one. I have a bike to put it on and also would like to make some of them.
 
Hi John,
Thank you.
I have two of stock exhaust system and center stand with hangers, and i dont need more.
Please, as the 810 mounted the Honda 750 K1 front master chlinder, what is the front brake switch system?
Those same of Honda 750K1?.
Someone knows.
Could some 810 owner says and post a picture please?
Ciao
Piero
 
Status
Not open for further replies.
Back
Top