1974 Norton 850 Interstate, not numbers matching --- best offer !!!

nortriubuell

VIP MEMBER
Joined
Aug 29, 2010
Messages
674
Country flag
1974 Norton 850 Commando Interstate. 200 miles since full rebuild. All new bearings, .020" over pistons, valves, valve job, etc. Also new isolastic mounts front and rear, (Andover Norton MK III type.) one piece rear axle, roller type GB layshaft bearing, MikesXS breather, Barnett clutch plates, the list goes on and on. Has single Mikuni carb for easy starting and smooth idle. Nissin 13mm front master cylinder, so the brakes actually work. Also has Triumph style speedo and tachometer, but I have the mounts for purists, that may want to switch back, just don't have the Norton instruments that mount in them. Not numbers matching, but built to ride.

Below is a link with more pictures; to my Jacksonville, FL craigslist add

850-2.jpg
850-5.jpg
850-6.jpg



850-2.jpg850-5.jpg850-6.jpg
850-2.jpg
850-5.jpg
850-6.jpg
850-8.jpg
850-9.jpg
850-10.jpg
850-11.jpg
 
Last edited:

nortriubuell

VIP MEMBER
Joined
Aug 29, 2010
Messages
674
Country flag
Bump, not numbers matching, but 850 motor with an 850 frame. Open to offers !!! (otherwise I'll be posting on ebay.)
 
Joined
Jan 19, 2012
Messages
1,035
Country flag
nortriubuell,

I am curious of your master cyl conversion. Is it the CnW kit? I thought their master cyl was from Brembo? Or is there another company offering these?

-Knut
 

Top