1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

1949 international model 30

Discussion in 'Other Norton Motorcycles' started by pbu 232, Apr 9, 2017.

  1. pbu 232

    pbu 232

    Joined:
    Sep 3, 2013
    Can anyone help with some parts for this bike, mainly a fuel tank, and a bottom vertical bevel gear, and outer primary cover would be a great start, thanks, Barry.
     
  2. Rohan

    Rohan

    Joined:
    Aug 26, 2010
    Stu Rogers of Inter Norton Spares in Wisbech Cambs and Paul Norman of Racing Norton http://racingnorton.co.uk/ are probably your best 1st points of contact.
    Understand that both these folks are sorta home businesses, so may be tough to contact sometimes.
    And may only be able to guide you where to proceed.
    That tank is going to be expensive !!!, and the outer primaries appear on fleabay etc now and then.
    If you allow that sv and ohv and ohc bits are not entirely identical, good luck !
     
  3. bearflag

    bearflag

    Joined:
    Dec 9, 2014
  4. pbu 232

    pbu 232

    Joined:
    Sep 3, 2013
  5. bearflag

    bearflag

    Joined:
    Dec 9, 2014
    My cams were pretty trashed so I saved and bought a pair from Ian Bennett. Very well made as is everything he does. Seems like his website is down right now. Was working a few days ago....???
     
  6. Bernhard

    Bernhard

    Joined:
    Apr 20, 2011
    From time to time some appear on Flea bay, and are always snapped up.
     
  7. pbu 232

    pbu 232

    Joined:
    Sep 3, 2013
    Thanks to all responders, I have bought from Bennetts, and yes, their stuff is top class. I'll probably go that way.
     

Share This Page