Hey everyone

22 years old and in Manchester the north west of the united kingdom been obsessed with bikes for as long as i can remember

been reading about commando's on here for a while so thought Id sign up share with everyone my first norton a 1966 650ss the same guy owned her since new and sold her to me on the proviso Ill never sell it which I definitely wont. Amazing to think he had it for 43 years matching numbers and all that clobber but a bit rough round the edges in places ands got a little bit of a noise on the engine that Im trying to figure out. all fresh engine rebuild not even run in yet so guessing its gotta be something wrong timing wise maybe on the valves? whats everyone reckon put a video bellow

plans for the bike are
fix engine noise
get some new carbs on it undecided between the original 376 twin amals or concentrics
sort the forks as they are dead no rebound or anything probs a landsdowne kit as hes not to far from me few other peeps in the uk noc owners club running them to
set of john tickle rearsets so I can get my legs in a better position
manx clip ons and shorter shrouds
electronic ignition system
swept back exhausts with whatever gives the best gains engine wise
fontana 4ls front brake - so I can stop if a car pulls out on me rather than putting disks on
hagon rear shocks with shrouds - standard shocks are a bit on there last legs 43,000 miles of riding does that
oh and a new tank and seat to keep the original safe and resprayed on the shelf away from corrosion
then some engine tuning nice and mild but more refined than original

hope you all enjoy the pictures be more to come as I work on the bike

put a video clip up of the sound of the engine also some clips on my utube channel of my trip to the isle of man TT shows what the ferries are like haha crazy straps over your bike and stuff

Tom




from when I picked her up first thing I did was remove the indicators and the luggage rack lol were totally recking the lines of the bike



























loading her away to go home

G'day Tom, great to see you enjoy the finer things in life.
I'm very jealous of the SS.
Fantastic that you could buy a bike from the original owner.
If it's your first old one, then you may need to get used to the clatters and rattles, but do check the valve clearance.
There's a couple being restored on this forum now, so plenty of advice avaliable.
I guess we'll see some real nice pics soon. I don't know that we have a pro here so you may be the first.
Good stuff.
AC.

What an awesome find. I have a 1975 Yamaha XS 650 that was given to me by a family friend with the no sell provision. He purchased it new in 76, and parked it in 83. I think you found a nicer bike to keep.

Welcome, nice ride!! I would suggest keeping the rack, you'll be glad of it one day. Again welcome, lots of help available here on these threads. Cj

Hi everyone thanks for the brilliant replies yup going to drag the lighting gear out and get some pictures done of her soon as we get some dry weather that is the Joy of living in Manchester in the uk means it rains alot lol

having said that there are some brilliant roads around here which is a godsend,

just waiting to hear back of the original owner about the camshaft thats in the bike so I can check the valve clearances as he's on holiday at the moment

hopefully the first of many Nortons noticed my blade seems to have gotten shoved to one side haha

Thanks,

Tom

There's a happy lad.

Great story, great bike.

Welcome to Norton (and classic bike) ownership, the hobby needs guys like you to sustain it, hopefully once all your mates see your lovely bike they may be inclined to join the community.

With a fresh engine rebuild they take a bit of time to settle in, you could consider tightening the cylinder head and barrell after a few hundred miles and then redo the valve clearances. There is naturally quite a bit more clatter than on a modern bike, have a look and listen to some other British air-cooled twins for a reference point.

Do you even shave yet?





Welcome to the forum!

haha yup certainly do lol

definatley we've got to keep these bike alive and Im definatley going to get some of my mates of the jap stuff they are already hankering having heard the beast that is the 650ss hehe love her to bits

been obsessed with nortons since I was able to talk my uncle and godfather (dads bro) raced a gus kuhn back in the day and a reg dearden tuned commando was the fastest bike through the speedtrap at oulton ever at the time apparently and held a few lap records

wouldn't mind ditching the 675' tona and doing some classic racing instead on a commando (long as I get the acu ticks for my licence so I can race at the isle of man that is) definatly got the bug for that plus the tyres would be a bit cheaper to haha the tyres for these modern race bikes are a killer 380gbp for a new set now for the ones Ive been using so been buying scrubs to get by instead haha get there in the end

just sorted out a little oil leak before on the oil pipe to the timing chain side of the engine so least thats some progress and lots of pollishing and cleaning going to unwire the now defunct indicator cables and switch tomorrow and check the headsteady out as I've noticed there's certainly a lot of loose bolts including the wheel and fork topnuts oh and check the timing and the clearances out to just to make sure everything is spot on as its running a bit rich at the moment so gotta look at that as well

Thanks everyone for the comments really putting a big smile on my face its so great to be part of the wonderfull community that is nortons

What a nice find, you could just leave everything stock, it would be a real looker if you did and I am sure the guy who owned it before wouldn't mind it if you did.

Jean

Why ruin a very nice original bike with cafe racer mods? If you want a cafe racer, then sell the 650ss to someone who will appreciate it, and buy something like a Triton perhaps?

Carbonfibre wrote:Why ruin a very nice original bike with cafe racer mods? If you want a cafe racer, then sell the 650ss to someone who will appreciate it, and buy something like a Triton perhaps?

OK then, I take it you are willing to offer him a wad of cash right now to "save" it from being "ruined"

It will not be "ruined" if he keeps all the original bits, in fact many of the mods he is proposing make the bike beter to use everyday like an electronic ignition, better front brake, better shocks. He will most likely put a belt drive when he sees the primary chain stretch like a tired old rubber band and the primary cover leak like a sieve.

Jean

thanks Jean love your bike always fancy building something simillar as another project maybe once Ive finished this and my concours as new rd350lc ^_^ haha been a stickler with that one right down to the original washers

yep totally just about making the right sensible mods with it being ridden to improve the feel and safety of the bike. With regards to handling, braking and reliability a little and ground clearance of course. haha As I tend to ride quite far out into the country side where theres never any reception on the mobile If i break down, but amazing roads Ill never forget pushing my gixer 4 miles lol was way exhausted when it developed a fault till I got reception.

Deffo putting a belt drive on loool soon as I showed my uncle them in a catalogue he was like boomin hell wish I had them back in the day lol.

haha and trust me I do appreciate the bike I have, thats a bit unjust saying that carbon. not the attitude to get other youngsters involved lucky I had a mature head on my shoulders for my age lol. When I've scraped and saved just to get the 650ss with it being the bike my uncle raced and rode in the 60's like Jean said the tank will be being kept along with the original bits on the shelf for one reason and one alone to keep them intact, my uncle now owns a place in florida and trust me the weather over here in the uk is helish for our bikes and cars a brand new focus chassis is ruined in about 4 years due to the weather I get where I live, and seeing I intend to ride the bike its safer for the parts seeing Im never going to sell it to keep them boxed and safe all tucked away in bubble wrap till Im ready to retire her from the road for safe keeping at which time all the original parts will be bolted back on in the mint condition they are in + by cafe racing it Im only changing the tank rearsets and seat and bars for genuine manx norton stuff which I can lay my hands on through my contacts excluding the tank which will most likley be from unity equipe to fit to the slimline chassis.

Thanks for all the cracking comments everyone, will get some more pictures up soon its really really gleaming now just got to rebuild the speedo as the face has a scratch on it so thats another thing onto the list

Tom

haha gotta watch those pesky manx pistons

speaking of 675s this is my baby bought it of Maria Costello MBE about 2 years ago just got to get it into some action next year just been doing a few track days to aclimatise myself to her very swift bike and handles like its on rails infact I'd go as far to say its the best handling bike I've ever rode and Ive road a few now

got a scan of a dunstall catalouge somewhere intersting to see and got the tuning manual and all the 650ss workshop manuals of course never stop reading and learning well I try my hardest anyway haha

slightly off topic but here's my 675



thanks,

Tom