 |
|
|---|
Tach seal mod for 850 Commando
9 posts
• Page 1 of 1
Tach seal mod for 850 Commando
by Mark Cigainero » Mon Mar 08, 2010 6:49 pm
Can you do the tach seal mod for a Commando on a drill press or is a mill needed??? Where do you get the seal. I need to do it on several bikes. Thanks Mark Cigainero
Mark Cigainero
- Mark Cigainero
- Posts: 146
- Joined: Thu Mar 01, 2007 8:31 pm
- Location: Fort Worth Texas
Re: Tach seal mod for 850 Commando
by Jeandr » Mon Mar 08, 2010 8:37 pm
-
Jeandr - Posts: 2116
- Joined: Tue Jan 22, 2008 9:13 am
- Location: Montreal, Canada
Re: Tach seal mod for 850 Commando
by Danno » Mon Mar 08, 2010 9:04 pm
I did mine in a vise with a VSR electric drill and used a Honda seal (forget the part number) but it used to be in the USNOA's tech digest. I have it stashed somewhere. The Honda part may or may not be available any longer.
- Danno
- Posts: 447
- Joined: Sun Feb 07, 2010 10:42 am
- Location: Southwestern Illinois
Re: Tach seal mod for 850 Commando
by Danno » Mon Mar 08, 2010 9:08 pm
I don't think he was looking for a blanking plate, rather a seal that prevents the tach drive leaking oil.Jeandr wrote:CNW has them at $17 each http://www.coloradonortonworks.com/catalog/engine.asp (look for #111)
Jean
- Danno
- Posts: 447
- Joined: Sun Feb 07, 2010 10:42 am
- Location: Southwestern Illinois
Re: Tach seal mod for 850 Commando
by Jeandr » Mon Mar 08, 2010 10:36 pm
Danno wrote:I don't think he was looking for a blanking plate, rather a seal that prevents the tach drive leaking oil.Jeandr wrote:CNW has them at $17 each http://www.coloradonortonworks.com/catalog/engine.asp (look for #111)
Jean
I will be off line for a while, got ot take reading lessons or else stop trying to post while watching TV 
Jean
-
Jeandr - Posts: 2116
- Joined: Tue Jan 22, 2008 9:13 am
- Location: Montreal, Canada
Re: Tach seal mod for 850 Commando
by littlefield » Tue Mar 09, 2010 5:11 am
I ordered a seal from Bike Bandit. It's the tachometer gear box seal from a 71 Honda CB450.
- littlefield
- Posts: 137
- Joined: Sun Jul 20, 2008 5:20 am
- Location: Clute, TX
Re: Tach seal mod for 850 Commando
by T.C. » Tue Mar 09, 2010 10:28 am
Check the Old Britts website, under Tech Articles.
Fred has a concise write-up with bore size and part numbers.
Fred has a concise write-up with bore size and part numbers.
Just down the road from next to nowhere...
-
T.C. - Posts: 43
- Joined: Sun Sep 14, 2008 2:21 pm
- Location: NW Ohio
Re: Tach seal mod for 850 Commando
by swooshdave » Tue Mar 09, 2010 11:43 am
T.C. wrote:Check the Old Britts website, under Tech Articles.
Fred has a concise write-up with bore size and part numbers.
Tach Seal
You probably want to go into town, and find a up to date Jap Bike store,
With a full spares department, a clean workshop, and kean young mechanics.
And ask them if theres a Grumpy Old Bloke out in the Hills, who knows how to fix Real Motorcycles.
Matt
With a full spares department, a clean workshop, and kean young mechanics.
And ask them if theres a Grumpy Old Bloke out in the Hills, who knows how to fix Real Motorcycles.
Matt
-
swooshdave - Posts: 6024
- Joined: Wed Apr 15, 2009 10:53 pm
- Location: Portland, Oregon
Re: Tach seal mod for 850 Commando
by L.A.B. » Tue Mar 09, 2010 12:57 pm
T.C. wrote:Fred has a concise write-up with bore size and part numbers.
I did this modification some years ago, as I happened to have an odd (if I remember correctly) 7 x 14 x 4 mm rotary shaft seal amongst my supply of spares which looked as if it would do the job.
I drilled the underside of my MkIII's tacho housing to a depth of approximately 4mm using a 14.0 mm drill bit with a hand held electric drill, and then Loctited the seal in position, and it's never leaked since.
-
L.A.B. - Moderator
- Posts: 6121
9 posts
• Page 1 of 1
Return to Norton Commando Motorcycles.
Who is online
Users browsing this forum: Dances with Shrapnel, pvisseriii and 1 guest