Non-MkIII parts I can see are:
Front wheel
Front mudguard/fender (could be cut-down?)
Instrument housings
Lower yoke/triple tree
Handlebar switchgear, throttle, levers & brackets
Fuel tank
Left side cover
Airbox
Seat (Triumph)
Ignition switch housing
Exhaust system
Gear shift lever
However, the right hand crankcase does appear to be a MkIII item (but the left hand case may not be!)
Also, the headlamp brackets are fitted on the wrong sides, so they are upside down!
 |
|
|---|
Rolling basket case (if there is such a thing)
33 posts
• Page 3 of 3 • 1, 2, 3
Re: Rolling basket case (if there is such a thing)
by L.A.B. » Tue Jan 26, 2010 8:30 am
-
L.A.B. - Moderator
- Posts: 6593
Re: Rolling basket case (if there is such a thing)
by Tintin » Tue Jan 26, 2010 2:28 pm
Is that "fireflake bronze"?
Tim
Tim
--
1964 Norton Atlas - 1970 Norton Commando 750 Roadster - 1972 HD FLH1200 Electra Glide - 1974 Norton Commando 850 wreck - 1973 Lotus Elan +2
Parts falling of these vehicles are of the finest british craftsmanship.
1964 Norton Atlas - 1970 Norton Commando 750 Roadster - 1972 HD FLH1200 Electra Glide - 1974 Norton Commando 850 wreck - 1973 Lotus Elan +2
Parts falling of these vehicles are of the finest british craftsmanship.
- Tintin
- Posts: 391
- Joined: Thu Mar 12, 2009 4:56 am
- Location: Germany
Re: Rolling basket case (if there is such a thing)
by 73850 » Wed Jan 27, 2010 4:36 pm
Don't know,I would say if that color is avial.in a rattle can..then yes.Have been trying to decide which route to take on this (back to orig.or Colorado Norton style custom) since this appears to be a bunch of mismatched parts I may go the latter...
Any insight as to a website that has photos of custom Nortons..
Any insight as to a website that has photos of custom Nortons..
1993 Suzuki VX800 Shaft Drive
- 73850
- Posts: 9
- Joined: Thu Jan 14, 2010 2:42 pm
33 posts
• Page 3 of 3 • 1, 2, 3
Return to Norton Commando Motorcycles.
Who is online
Users browsing this forum: Google [Bot] and 1 guest