Welcome to the Access Norton Forum. Login as a VIP member to remove the advertising banners.


remove the push rod covers from a 57' 19S (ES2)?

Norton Models (not Commando or P11)

remove the push rod covers from a 57' 19S (ES2)?

Postby mark99 » Mon Jul 31, 2017 4:52 pm

how does one remove the push rod covers from a 57' 19S (ES2)? (from the head)

mark99
Posts: 85
Joined: Tue Jul 03, 2012 10:03 am
Location: Kirkland, WA USA

Re: remove the push rod covers from a 57' 19S (ES2)?

Postby robs ss » Mon Jul 31, 2017 5:08 pm

They simply pull out
There is a rubber sleeve (part no. 20049) in each hole in the head which the pushrod tube pushes (firmly) into.
The is also a steel washer above and below this sleeve. The top one (20047) is flat while the lower one (20045) is dished to match the step in the pushrod tube.
The attached pic from the parts list shows them as items 46, 48 & 49.
The sleeve does go hard with heat and age so you may need some force to pull them out
Cheers
Rob


Image
1962 Norton ES2
1964 Norton 650SS
User avatar
Access Norton VIP Paying Member
robs ss
VIP MEMBER
Posts: 186
Joined: Tue Aug 16, 2016 3:17 am
Location: Boyne Island, Queensland, Australia

Re: remove the push rod covers from a 57' 19S (ES2)?

Postby mark99 » Mon Jul 31, 2017 5:21 pm

Hi, Thanks!
I was able to get them out
I was afraid of damaging them but wiggling them while pulling really hard and they came out

mark99
Posts: 85
Joined: Tue Jul 03, 2012 10:03 am
Location: Kirkland, WA USA


Return to Other Nortons

Who is online

Users browsing this forum: No registered users and 2 guests