Norton Commando
Jerrydoe.com  Forum Home  Norton Commando Forum  Photos  [FAQ]  [Search]  [Memberlist]   
 [Profile]  [Check your private messages]  [Register]  [Log in] 
Cush Drive Rubbers Melting !!!

 
Post new topic   Reply to topic    Norton Commando Forum Index -> Norton Commando Motorcycles.
View previous topic :: View next topic  
Author Message
Guest






PostPosted: Sun Apr 25, 2004 5:04 pm    Post subject: Cush Drive Rubbers Melting !!! Reply with quote

My rear cush drive rubbers have melted on me even though I do not think my rear brake shoes are adjusted too "tight" Crying or Very sad
Is having the brakes adjusted incorrectly the only reason this can happen ?
Thanks in advance for any input Very Happy
Back to top
norbsa48503



Joined: 07 Apr 2004
Posts: 995
Location: Flint, Michigan

PostPosted: Sun Apr 25, 2004 5:30 pm    Post subject: Reply with quote

I have seen many people over adjust the rear brake on Commandos. What seems right in the drive way is not good over bumps on the road. If you get enough good compressions of the rear tire it will over heat the brake the adjustment must be to your wieght. Lot of engine oil is the only other thing that could do these in but you would see that. These rubbers are very hard do wear out very quickly when they go. While you have it all apart it's a good time to increase the size of your clearance hole in your brake plate to 7/8 if this has not been done to your machine. This allows the brake to centalize itself more easly when you slam it on to tighten the axles. norbsa
Back to top
nortonfan



Joined: 24 Dec 2003
Posts: 362
Location: Brisbane, Australia

PostPosted: Sun Apr 25, 2004 5:38 pm    Post subject: Reply with quote

Thanks for the info norbsa, I will work on your advice.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Norton Commando Forum Index -> Norton Commando Motorcycles. All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

The Unapproachable Norton Commando

At the end of 1967 the Norton Commando was announced.

The Norton Commando was greeted with a certain amount of scepticism because on first sight the commando appeared to comprise of the old Norton Dominator twin cylinder engine mounted at an inclined angle in a set of new cylinder parts.

It was not realized that the new Norton Commando Isolastic method of engine suspension damped out all engine vibration and produced a machine which had uncanny smoothness for a vertical twin. In due course the critics were silenced and the Norton Commando had the distinction of being regarded as the first of todays so called superbikes. There can be little doubt that the original design concept of the Norton Commando has proved correct, since comparatively few modifications of any real consequence have been made since production commenced during 1968.

Now nearly 40 years later Norton Commando riders like us are a breed of our own, and as far as we are concerned its still more fun to go for a blat on the old Norton Commando, and fast. As a Norton Commando owner and enthusiast, my goal here is to promote and give credit to those who keep the Norton name going.

It is more deserving to give credit to the Commando itself, for after all these years it continues to be respected. The original Commando designers like John Favill are those who deserve the credit for developing this incredible motorcycle.

The Norton Commando Roadster and Interstate of the late seventies, never died. Although the Norton Villiers factory dispersed the tradition lived on. Today Kenny Dreer in the USA is developing the new 952 CC Norton. What a great looking bike this is, and its engineering is still based on the original layout. It will be interesting to see how the new 952CC Norton does in todays tough motorcycle market. One thing is for sure, I would own one if I could afford it.