Norton Commando
Jerrydoe.com  Forum Home  Norton Commando Forum  Photos  [FAQ]  [Search]  [Memberlist]   
 [Profile]  [Check your private messages]  [Register]  [Log in] 
Centre Stand

 
Post new topic   Reply to topic    Norton Commando Forum Index -> Norton Commando Motorcycles.
View previous topic :: View next topic  
Author Message
ChuckB
Guest





PostPosted: Fri Apr 16, 2004 3:24 pm    Post subject: Centre Stand Reply with quote

Can anyone tell me where I can find a centre stand for my 1973 750 Norton reasonably priced. Not listed in Walridge or M.A.P.
Part # 063051
Thanks. Chuck
Back to top
Ron L



Joined: 27 Feb 2004
Posts: 1149
Location: Ohio

PostPosted: Mon Apr 19, 2004 4:59 am    Post subject: Reply with quote

What do you consider reasonably priced? The '71-73 750 Commando stand is pretty weak. If you use one, never kickstart the bike on the stand. The 850 style is a bolt on replacement and is much stronger. New, these are about $100-$115 from most of the usual suspects. Used from eBay or swap meet, you can generally pick them up for $50-$60. The weaker 750 style I would not give more than $25-$30 for a used one that is not bent or re-welded. These are only good for a complete restoration.

If you are dead set on a 750 style, PM me I probably have one out in the shop.

Ron L
Back to top
norbsa48503



Joined: 07 Apr 2004
Posts: 1034
Location: Flint, Michigan

PostPosted: Mon Apr 19, 2004 1:37 pm    Post subject: Center Stand Reply with quote

I have an 850 stand on my 750and while it was still new set it up on a mill and bored out the holes to 26mm for sealed ball bearings. This is mentioned in the tech digest vertion 3 chapter 4 page 8. It makes it real easy to put the bike up and won't loosen over time. norbsa
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Norton Commando Forum Index -> Norton Commando Motorcycles. All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

The Unapproachable Norton Commando

At the end of 1967 the Norton Commando was announced.

The Norton Commando was greeted with a certain amount of scepticism because on first sight the commando appeared to comprise of the old Norton Dominator twin cylinder engine mounted at an inclined angle in a set of new cylinder parts.

It was not realized that the new Norton Commando Isolastic method of engine suspension damped out all engine vibration and produced a machine which had uncanny smoothness for a vertical twin. In due course the critics were silenced and the Norton Commando had the distinction of being regarded as the first of todays so called superbikes. There can be little doubt that the original design concept of the Norton Commando has proved correct, since comparatively few modifications of any real consequence have been made since production commenced during 1968.

Now nearly 40 years later Norton Commando riders like us are a breed of our own, and as far as we are concerned its still more fun to go for a blat on the old Norton Commando, and fast. As a Norton Commando owner and enthusiast, my goal here is to promote and give credit to those who keep the Norton name going.

It is more deserving to give credit to the Commando itself, for after all these years it continues to be respected. The original Commando designers like John Favill are those who deserve the credit for developing this incredible motorcycle.

The Norton Commando Roadster and Interstate of the late seventies, never died. Although the Norton Villiers factory dispersed the tradition lived on. Today Kenny Dreer in the USA is developing the new 952 CC Norton. What a great looking bike this is, and its engineering is still based on the original layout. It will be interesting to see how the new 952CC Norton does in todays tough motorcycle market. One thing is for sure, I would own one if I could afford it.