Norton Commando
Jerrydoe.com  Forum Home  Norton Commando Forum  Photos  [FAQ]  [Search]  [Memberlist]   
 [Profile]  [Check your private messages]  [Register]  [Log in] 
Warning light assimilator, Capacitor, Rectifier

 
Post new topic   Reply to topic    Norton Commando Forum Index -> Norton Commando Motorcycles.
View previous topic :: View next topic  
Author Message
Phil
Guest





PostPosted: Tue Aug 19, 2003 11:07 am    Post subject: Warning light assimilator, Capacitor, Rectifier Reply with quote

Can anybody please tell me where I'm supposed to install on a 1973 norton commando roadster 850 the warning light assimilator, rectifier and capacitor?

Help
Back to top
Phil
Guest





PostPosted: Wed Aug 20, 2003 8:54 am    Post subject: Reply with quote

Actually, to make it a bit more clear, where on the bike are they supposed to fasten?
Back to top
guest
Guest





PostPosted: Wed Aug 20, 2003 1:34 pm    Post subject: Reply with quote

the assimilator mounts on a spring that is attacht to the left rear coil mount bolt.
the rectifier mounts on the left top side cover mounting bracket from the rear. the stud on it is used as one of the bolts for that bracket.

the blue MC2 capacitor mounts on the rear fender bracket to frame bolt on the left. this bracket is the one that is visable in the battery tray at the rear plate from the main backbone to the rear hoop.
hope this helps

bill
Back to top
Phil
Guest





PostPosted: Thu Aug 21, 2003 4:28 am    Post subject: Reply with quote

Thanks alot dude! Very Happy
Back to top
hultman



Joined: 02 Apr 2004
Posts: 3

PostPosted: Fri Apr 02, 2004 6:01 am    Post subject: Assimilator mounting Reply with quote

Hi

I have two kinds of warning light assimilators for a '74 Commando. Both are the old round type. One has the spring mount and the other, a brand new one, just has an "L" bracket attached to the end.

Anyone had any experience mounting these without using the spring?

Jim
Back to top
Ron L



Joined: 27 Feb 2004
Posts: 1098
Location: Ohio

PostPosted: Fri Apr 02, 2004 7:39 am    Post subject: Reply with quote

DON'T DO IT! These archaic mechanical devices are extremely shock sensitive. It is a wonder they survive even with the spring. If you take apart a dead one you'll see what I mean. The INOA Tech Digest has a schematic for making a solid state version, but I could never get mine to work (I'm obviously not an electronics tech!). I bought a unit from RGM which is solid state, but is wired differently. Seems to last much longer (3 years now).

Ron L
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Norton Commando Forum Index -> Norton Commando Motorcycles. All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

The Unapproachable Norton Commando

At the end of 1967 the Norton Commando was announced.

The Norton Commando was greeted with a certain amount of scepticism because on first sight the commando appeared to comprise of the old Norton Dominator twin cylinder engine mounted at an inclined angle in a set of new cylinder parts.

It was not realized that the new Norton Commando Isolastic method of engine suspension damped out all engine vibration and produced a machine which had uncanny smoothness for a vertical twin. In due course the critics were silenced and the Norton Commando had the distinction of being regarded as the first of todays so called superbikes. There can be little doubt that the original design concept of the Norton Commando has proved correct, since comparatively few modifications of any real consequence have been made since production commenced during 1968.

Now nearly 40 years later Norton Commando riders like us are a breed of our own, and as far as we are concerned its still more fun to go for a blat on the old Norton Commando, and fast. As a Norton Commando owner and enthusiast, my goal here is to promote and give credit to those who keep the Norton name going.

It is more deserving to give credit to the Commando itself, for after all these years it continues to be respected. The original Commando designers like John Favill are those who deserve the credit for developing this incredible motorcycle.

The Norton Commando Roadster and Interstate of the late seventies, never died. Although the Norton Villiers factory dispersed the tradition lived on. Today Kenny Dreer in the USA is developing the new 952 CC Norton. What a great looking bike this is, and its engineering is still based on the original layout. It will be interesting to see how the new 952CC Norton does in todays tough motorcycle market. One thing is for sure, I would own one if I could afford it.