| View previous topic :: View next topic |
| Author |
Message |
Dana
Joined: 07 Nov 2003 Posts: 124 Location: Folsom, CA (not the prison)
|
Posted: Fri Jan 09, 2004 9:30 pm Post subject: Original Norton colors ?? |
|
|
Hi all,
This has been asked here and there with no response, so I'll try again.
Does anyone know where one can obtain the original Norton color ... either HEX or RGB ... or even just a real color swatch
I want to match up the original, and need to know what it was for that year
I know Roy Bacon't book has a chart, so if someone wouldn't mind faxing me, or scanning and PDF-ing me I would appreciate it.
I'll keep surfing. |
|
| Back to top |
|
 |
illf8ed
Joined: 30 Dec 2003 Posts: 474
|
Posted: Fri Jan 09, 2004 9:58 pm Post subject: Norton colors or colours |
|
|
Hi Dana,
The reason you don't get a response is there is no information that a paint store will be able to use to mix the original Commando colors. The only real way to match is to find an original part that hasn't seen much sunlight and get the shop to match that. Metallics are difficult and the metal flakes are probably not likely. |
|
| Back to top |
|
 |
Dana
Joined: 07 Nov 2003 Posts: 124 Location: Folsom, CA (not the prison)
|
Posted: Sat Jan 10, 2004 12:50 am Post subject: |
|
|
Thanks David,
I guess I can remove the top enamel carefully to expose enough to match up visually.
I didn't know metalics were in production till lthe late 70's, early 80's.
Last edited by Dana on Tue Jul 13, 2004 12:12 am; edited 1 time in total |
|
| Back to top |
|
 |
Dana
Joined: 07 Nov 2003 Posts: 124 Location: Folsom, CA (not the prison)
|
Posted: Sat Jan 10, 2004 5:34 pm Post subject: |
|
|
I removed a good area of the black rattle-can enamel from the tank underside. The color is a maroonish-red and looks to be a metallic. It's a high quality paint (fuel-proof), so it's either the original, or an after-job. I like the color more and more!!
Anyway, I figure why in the world do I want to keep the stock color I'm going to repaint it anyway, so why not do what I want ... FLAMES anyone
My plan now is to paint it the same metallic or candy-apple red myself with Urethane and a bunch of clear coats. I won't bother with the original lacquer type paint. Urethane is harder, and less toxic. I'll also put the correct gold Norton decals under the clear.
Now I have to figure out how to paint  |
|
| Back to top |
|
 |
Denny850 Guest
|
Posted: Sun Jan 18, 2004 11:26 am Post subject: |
|
|
I had same problem when trying to find original code for light blue I wanted to paint bike. None existed even from best sources in England. I ended up with a color called "Pacific Blue" which is also a Triumph stock color. I found the original metal flake blue under one of my side covers however it was a VERY HEAVY metal flake and looked garish as hell. So I went to my paint guy and he matched a color of Pacific Blue with light metallic in it and it came out perfect, a dead ringer for the original shade of blue without the "Las Vegas" chopper look. You will find that the pro vintage paint guys guard their color codes very closely and normally won't give out codes, this is what I found here anyway.
So best to find the color/shade you want (unless you want totally original) and go with it and be happy. There were not too many Norton factory colors anyway, like Black, Yellow, Red, Silver are the ones you see all the time. That is why I went for the blue, have not seen one like it here yet. Good luck.
Dennis
Vancouver, Washington |
|
| Back to top |
|
 |
Jerry Kast
Joined: 12 Jul 2004 Posts: 1
|
Posted: Mon Jul 12, 2004 4:23 am Post subject: '69 Norton Commando Fastback orig paint color w/badges-tank |
|
|
| I have a 1969 Norton Commando Fastback with round Norton badges on the tank. I am looking to find the original paint scheme for this model. Thanks. |
|
| Back to top |
|
 |
Ron L
Joined: 27 Feb 2004 Posts: 1149 Location: Ohio
|
Posted: Mon Jul 12, 2004 11:46 am Post subject: |
|
|
A '69 with badges would have the same scheme as the one on this page. Alternatively, there were a few British Racing Green where this is red.
http://home.fuse.net/cbmcpagehtml/ |
|
| Back to top |
|
 |
nortonfan
Joined: 24 Dec 2003 Posts: 362 Location: Brisbane, Australia
|
|
| Back to top |
|
 |
|
Norton Commando Forum by Corporate Pages Web hosting using phpbb
The Unapproachable Norton Commando
At the end of 1967 the Norton Commando was announced.
The Norton Commando was greeted with a certain amount of scepticism because on first sight the commando appeared to comprise of the old Norton Dominator twin cylinder engine mounted at an inclined angle in a set of new cylinder parts.
It was not realized that the new Norton Commando Isolastic method of engine suspension damped out all engine vibration and produced a machine which had uncanny smoothness for a vertical twin. In due course the critics were silenced and the Norton Commando had the distinction of being regarded as the first of todays so called superbikes. There can be little doubt that the original design concept of the Norton Commando has proved correct, since comparatively few modifications of any real consequence have been made since production commenced during 1968.
Now nearly 40 years later Norton Commando riders like us are a breed of our own, and as far as we are concerned its still more fun to go for a blat on the old Norton Commando, and fast. As a Norton Commando owner and enthusiast, my goal here is to promote and give credit to those who keep the Norton name going.
It is more deserving to give credit to the Commando itself, for after all these years it continues to be respected. The original Commando designers like John Favill are those who deserve the credit for developing this incredible motorcycle.
The Norton Commando Roadster and Interstate of the late seventies, never died. Although the Norton Villiers factory dispersed the tradition lived on. Today Kenny Dreer in the USA is developing the new 952 CC Norton. What a great looking bike this is, and its engineering is still based on the original layout. It will be interesting to see how the new 952CC Norton does in todays tough motorcycle market. One thing is for sure, I would own one if I could afford it.