Norton Commando
Jerrydoe.com  Forum Home  Norton Commando Forum  Photos  [FAQ]  [Search]  [Memberlist]   
 [Profile]  [Check your private messages]  [Register]  [Log in] 
Where do I get reasonable carburetor parts?

 
Post new topic   Reply to topic    Norton Commando Forum Index -> Norton Commando Motorcycles.
View previous topic :: View next topic  
Author Message
DenisJ



Joined: 18 Oct 2008
Posts: 1
Location: Sacramento, CA

PostPosted: Tue Oct 28, 2008 12:41 pm    Post subject: Where do I get reasonable carburetor parts? Reply with quote

Hi all,

I just bought my first Norton Commando 74 Roadster. Its a complete unit but needs a bit of love. It has been sitting for the better part of 20 years. I have been hunting for a carb rebuild kit incluting the brass and the needles because I happen to be missing one of the needles and also missing both needle clips. Any help would be great. E-bay has a few but nothing really complete. I would like to find one or two vendors that have all I need. Thanks again!!!
Back to top
L.A.B.
Moderator


Joined: 20 Nov 2004
Posts: 1948
Location: Norfolk, UK

PostPosted: Tue Oct 28, 2008 2:28 pm    Post subject: Reply with quote

Hello DenisJ,

Any good Norton/British parts supplier (such as Rabers) should be able to sell you what you need?

http://www.rabers.com/


Amal manufacturer's (Burlen Fuel Systems UK) website: http://www.burlen.co.uk/ - useful for identifying parts and finding the Amal part numbers etc. (>order spares).
Back to top
Cookie



Joined: 05 Oct 2008
Posts: 169

PostPosted: Tue Oct 28, 2008 7:53 pm    Post subject: Reply with quote

I live in San Mateo so Rabers is kind of my local dealer. Take a trip down there and you will enjoy spending the time, they have some neat stuff.
Their web site isn't up to their place in person.
Back to top
BillT



Joined: 27 Jan 2008
Posts: 126
Location: Broward County, Florida

PostPosted: Wed Oct 29, 2008 5:14 am    Post subject: Reply with quote

Amal still makes new carbs and rebuild kits. My local guy carries a ready supply of both.

The kit does not come with jets or needles - you need to get them separately.

As I remember, the rebuild kit comes with the float bowl inlet valve, bowl gasket, new air screw and o-ring, bowl drain gasket, needle clip and manifold o-ring. 7 pieces in a little plastic bag with 'Amal genuine spares' printed on it.

New 932s are about $200 apiece.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Norton Commando Forum Index -> Norton Commando Motorcycles. All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

The Unapproachable Norton Commando

At the end of 1967 the Norton Commando was announced.

The Norton Commando was greeted with a certain amount of scepticism because on first sight the commando appeared to comprise of the old Norton Dominator twin cylinder engine mounted at an inclined angle in a set of new cylinder parts.

It was not realized that the new Norton Commando Isolastic method of engine suspension damped out all engine vibration and produced a machine which had uncanny smoothness for a vertical twin. In due course the critics were silenced and the Norton Commando had the distinction of being regarded as the first of todays so called superbikes. There can be little doubt that the original design concept of the Norton Commando has proved correct, since comparatively few modifications of any real consequence have been made since production commenced during 1968.

Now nearly 40 years later Norton Commando riders like us are a breed of our own, and as far as we are concerned its still more fun to go for a blat on the old Norton Commando, and fast. As a Norton Commando owner and enthusiast, my goal here is to promote and give credit to those who keep the Norton name going.

It is more deserving to give credit to the Commando itself, for after all these years it continues to be respected. The original Commando designers like John Favill are those who deserve the credit for developing this incredible motorcycle.

The Norton Commando Roadster and Interstate of the late seventies, never died. Although the Norton Villiers factory dispersed the tradition lived on. Today Kenny Dreer in the USA is developing the new 952 CC Norton. What a great looking bike this is, and its engineering is still based on the original layout. It will be interesting to see how the new 952CC Norton does in todays tough motorcycle market. One thing is for sure, I would own one if I could afford it.