Norton Commando
Jerrydoe.com  Forum Home  Norton Commando Forum  Photos  [FAQ]  [Search]  [Memberlist]   
 [Profile]  [Check your private messages]  [Register]  [Log in] 
rear brakes, drum and hub

 
Post new topic   Reply to topic    Norton Commando Forum Index -> Norton Commando Motorcycles.
View previous topic :: View next topic  
Author Message
rgla



Joined: 25 Oct 2008
Posts: 5

PostPosted: Mon Oct 27, 2008 8:18 pm    Post subject: rear brakes, drum and hub Reply with quote

the pins that hold the brake shoes on have ground into the back of the drum. Is there a spacer or something that sits on the dummy axle before the brakes shoes and plate get fitted into the drum? also, the shoes seem a liitle glazed. Is there any way to deglaze them? and what is the best way to take the sheen off the drum withouth having it turned? emory cloth? thanks much
Back to top
Keith1069



Joined: 10 Jan 2005
Posts: 240
Location: Hampshire UK

PostPosted: Tue Oct 28, 2008 2:01 am    Post subject: Reply with quote

Washer part no 06 7603 sits on top of the stub axle and against the brake backplate. Have a look at http://www.nortonmotors.de/ANIL/Norton%20Website/norton/parts-list.php It is about 040" thick if I remember.
180 to 240 grit wet & dry would be OK on shoes and drum surface.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Norton Commando Forum Index -> Norton Commando Motorcycles. All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

The Unapproachable Norton Commando

At the end of 1967 the Norton Commando was announced.

The Norton Commando was greeted with a certain amount of scepticism because on first sight the commando appeared to comprise of the old Norton Dominator twin cylinder engine mounted at an inclined angle in a set of new cylinder parts.

It was not realized that the new Norton Commando Isolastic method of engine suspension damped out all engine vibration and produced a machine which had uncanny smoothness for a vertical twin. In due course the critics were silenced and the Norton Commando had the distinction of being regarded as the first of todays so called superbikes. There can be little doubt that the original design concept of the Norton Commando has proved correct, since comparatively few modifications of any real consequence have been made since production commenced during 1968.

Now nearly 40 years later Norton Commando riders like us are a breed of our own, and as far as we are concerned its still more fun to go for a blat on the old Norton Commando, and fast. As a Norton Commando owner and enthusiast, my goal here is to promote and give credit to those who keep the Norton name going.

It is more deserving to give credit to the Commando itself, for after all these years it continues to be respected. The original Commando designers like John Favill are those who deserve the credit for developing this incredible motorcycle.

The Norton Commando Roadster and Interstate of the late seventies, never died. Although the Norton Villiers factory dispersed the tradition lived on. Today Kenny Dreer in the USA is developing the new 952 CC Norton. What a great looking bike this is, and its engineering is still based on the original layout. It will be interesting to see how the new 952CC Norton does in todays tough motorcycle market. One thing is for sure, I would own one if I could afford it.