Norton Commando
Jerrydoe.com  Forum Home  Norton Commando Forum  Photos  [FAQ]  [Search]  [Memberlist]   
 [Profile]  [Check your private messages]  [Register]  [Log in] 
Anyone have experience using rotor and stator made China

 
Post new topic   Reply to topic    Norton Commando Forum Index -> Norton Commando Motorcycles.
View previous topic :: View next topic  
Author Message
Yellow_Cad



Joined: 02 Apr 2008
Posts: 148
Location: Sacramento, CA

PostPosted: Wed Jul 02, 2008 7:25 pm    Post subject: Anyone have experience using rotor and stator made China Reply with quote

My friend needs to replace his rotor and stator on a 72 750. Does anyone have any experiece (good or bad) with the ones made in China.
Back to top
Keith1069



Joined: 10 Jan 2005
Posts: 231
Location: Hampshire UK

PostPosted: Thu Jul 03, 2008 4:16 am    Post subject: Reply with quote

What brand? Sparx and Wassell have their parts made in China and I fitted a Sparx 120w stator 2 years (7000m) ago and seems to be holding up well. The replacement Wassell fitted 4 years earlier overheated and started to char the encapsulation in my no oil belt drive. No sign of that on the Sparx. I tried to find out what insulation class wire is used in these stators. Class F or H, 155 or 180C would be nice but it's probably only B at 120C.
Back to top
Hortons Norton



Joined: 12 Oct 2007
Posts: 120
Location: Long Beach, California

PostPosted: Thu Jul 03, 2008 6:32 am    Post subject: Reply with quote

About 1 1/2 years on a Sparx and no problems, Chuck.
Back to top
grandpaul



Joined: 15 Jan 2008
Posts: 531
Location: Laredo (south) Texas

PostPosted: Thu Jul 03, 2008 6:53 am    Post subject: Reply with quote

I use SPARX exclusively, no issues whatsoever.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Norton Commando Forum Index -> Norton Commando Motorcycles. All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

The Unapproachable Norton Commando

At the end of 1967 the Norton Commando was announced.

The Norton Commando was greeted with a certain amount of scepticism because on first sight the commando appeared to comprise of the old Norton Dominator twin cylinder engine mounted at an inclined angle in a set of new cylinder parts.

It was not realized that the new Norton Commando Isolastic method of engine suspension damped out all engine vibration and produced a machine which had uncanny smoothness for a vertical twin. In due course the critics were silenced and the Norton Commando had the distinction of being regarded as the first of todays so called superbikes. There can be little doubt that the original design concept of the Norton Commando has proved correct, since comparatively few modifications of any real consequence have been made since production commenced during 1968.

Now nearly 40 years later Norton Commando riders like us are a breed of our own, and as far as we are concerned its still more fun to go for a blat on the old Norton Commando, and fast. As a Norton Commando owner and enthusiast, my goal here is to promote and give credit to those who keep the Norton name going.

It is more deserving to give credit to the Commando itself, for after all these years it continues to be respected. The original Commando designers like John Favill are those who deserve the credit for developing this incredible motorcycle.

The Norton Commando Roadster and Interstate of the late seventies, never died. Although the Norton Villiers factory dispersed the tradition lived on. Today Kenny Dreer in the USA is developing the new 952 CC Norton. What a great looking bike this is, and its engineering is still based on the original layout. It will be interesting to see how the new 952CC Norton does in todays tough motorcycle market. One thing is for sure, I would own one if I could afford it.