Norton Commando
Jerrydoe.com  Forum Home  Norton Commando Forum  Photos  [FAQ]  [Search]  [Memberlist]   
 [Profile]  [Check your private messages]  [Register]  [Log in] 
Front Brake Caliper Conversion

 
Post new topic   Reply to topic    Norton Commando Forum Index -> Norton Commando Motorcycles.
View previous topic :: View next topic  
Author Message
Scooter62



Joined: 05 Dec 2003
Posts: 166
Location: South Florida

PostPosted: Wed Aug 04, 2004 11:27 am    Post subject: Front Brake Caliper Conversion Reply with quote

Here's a company that sells the bracket to use a Brembo caliper on a Norton and it appears they sell the rotors too. This may be the same set up that CNW sells. Take a look http://www.qtmi.com/systems/nortonbrakes.htm
You might be able to use a ducati/brembo caliper with this bracket also. The stock rotor might not be the same size though so you may be forced to get their rotor.
It does look like a nice clean installation though and price appears to be in line with CNW and Norvil kits.

Scooter
owner of the never ending project MK III
Back to top
Ron L



Joined: 27 Feb 2004
Posts: 1101
Location: Ohio

PostPosted: Thu Aug 05, 2004 3:14 am    Post subject: Reply with quote

I checked with QTM. They indeed supply CNW. Their price breakdown is $85 for the caliper adapter, $370 for the 300mm (11.8 inch) rotor, and $275-355 for a caliper depending on what finish. Thinking seriously about the adapter and rotor. Too bad it's not designed for the 320mm rotors commonly found on Italian stuff. I'd still like to find a machinist willing to work with me to make an adapter from the Norton wheel to a 320mm Brembo (Ducati) rotor and adapter from the fork leg to a Brembo caliper. It seems this could be a way to an economical dynamite brake.
Back to top
Derek Wilson



Joined: 25 Jun 2004
Posts: 86
Location: The Great White North

PostPosted: Thu Aug 05, 2004 11:56 am    Post subject: Reply with quote

Ron,
You might find a Suzuki GSXR rotor that would fit your needs. A guy in my area fitted one with out much trouble. They at least have 5 holes, apparently the offset is close as well. He used a six piston caliper off of a Kawi ZX-??. Haven't talked to him in a while, but that brake must be killer.

I have been toying with the GSXR idea for a while, but my brake works really good as is (squawk the tire with 2 fingers, moderate squeeze).

If you want something custom made, let me know. I have the Norton fork leg and associated hardware modelled in CAD, a new adapter plate would be a piece of cake.

Let me know off line: norton Cool golden.net

Regards,

Derek
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Norton Commando Forum Index -> Norton Commando Motorcycles. All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

The Unapproachable Norton Commando

At the end of 1967 the Norton Commando was announced.

The Norton Commando was greeted with a certain amount of scepticism because on first sight the commando appeared to comprise of the old Norton Dominator twin cylinder engine mounted at an inclined angle in a set of new cylinder parts.

It was not realized that the new Norton Commando Isolastic method of engine suspension damped out all engine vibration and produced a machine which had uncanny smoothness for a vertical twin. In due course the critics were silenced and the Norton Commando had the distinction of being regarded as the first of todays so called superbikes. There can be little doubt that the original design concept of the Norton Commando has proved correct, since comparatively few modifications of any real consequence have been made since production commenced during 1968.

Now nearly 40 years later Norton Commando riders like us are a breed of our own, and as far as we are concerned its still more fun to go for a blat on the old Norton Commando, and fast. As a Norton Commando owner and enthusiast, my goal here is to promote and give credit to those who keep the Norton name going.

It is more deserving to give credit to the Commando itself, for after all these years it continues to be respected. The original Commando designers like John Favill are those who deserve the credit for developing this incredible motorcycle.

The Norton Commando Roadster and Interstate of the late seventies, never died. Although the Norton Villiers factory dispersed the tradition lived on. Today Kenny Dreer in the USA is developing the new 952 CC Norton. What a great looking bike this is, and its engineering is still based on the original layout. It will be interesting to see how the new 952CC Norton does in todays tough motorcycle market. One thing is for sure, I would own one if I could afford it.