Norton Commando
Jerrydoe.com  Forum Home  Norton Commando Forum  Photos  [FAQ]  [Search]  [Memberlist]   
 [Profile]  [Check your private messages]  [Register]  [Log in] 
mikuni setup

 
Post new topic   Reply to topic    Norton Commando Forum Index -> Norton Commando Motorcycles.
View previous topic :: View next topic  
Author Message
davemillard



Joined: 19 May 2004
Posts: 4

PostPosted: Mon Aug 02, 2004 7:45 am    Post subject: mikuni setup Reply with quote

Just received a mikuni carb conversion kit with K&N. I am hoping its a fairly easy bolt on job. The carb is used and was purchased on ebay,so I dont have any setup details. Has any one got one fitted who can tell me how to set it up.

Thanks
Back to top
norbsa48503



Joined: 07 Apr 2004
Posts: 1035
Location: Flint, Michigan

PostPosted: Tue Aug 03, 2004 4:25 am    Post subject: Reply with quote

Before you mount it pull it down and log all of the jets, neddle, slide cut away # so on. Get a Norton tech digest there are bench mark settings for 34mm and 36mm carbs there. I have found the cables that come with the kits to be way too heavy. Build your own out of the lightest stuff you can find. Carb should need choke for a block or two this is a good thing. All adjustments are done one at a time on a warm motor. norbsa
Back to top
Jason Curtiss



Joined: 14 Jun 2003
Posts: 667
Location: HOUSTON, TEXAS

PostPosted: Tue Aug 03, 2004 7:33 am    Post subject: Reply with quote

Norbsa,

Why is it important to have the lightest throttle cables you can find?

Thanks and regards,

Jason
Back to top
eyeguy
Guest





PostPosted: Tue Aug 03, 2004 9:44 am    Post subject: Reply with quote

Dave

does it have double springs in the body? Mine has two, if you use only one, app. the intake vacuum can cause the slide to stay up at high speed-woooohoooo!

Take care

paul
Back to top
norbsa48503



Joined: 07 Apr 2004
Posts: 1035
Location: Flint, Michigan

PostPosted: Tue Aug 03, 2004 5:43 pm    Post subject: Reply with quote

Jason, when the cable enters the carb it does so at an angle. the cables that come with these kits is so stiff that they kink the slide in the body and gall the chrome right away. I seen this three times. norbsa
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Norton Commando Forum Index -> Norton Commando Motorcycles. All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

The Unapproachable Norton Commando

At the end of 1967 the Norton Commando was announced.

The Norton Commando was greeted with a certain amount of scepticism because on first sight the commando appeared to comprise of the old Norton Dominator twin cylinder engine mounted at an inclined angle in a set of new cylinder parts.

It was not realized that the new Norton Commando Isolastic method of engine suspension damped out all engine vibration and produced a machine which had uncanny smoothness for a vertical twin. In due course the critics were silenced and the Norton Commando had the distinction of being regarded as the first of todays so called superbikes. There can be little doubt that the original design concept of the Norton Commando has proved correct, since comparatively few modifications of any real consequence have been made since production commenced during 1968.

Now nearly 40 years later Norton Commando riders like us are a breed of our own, and as far as we are concerned its still more fun to go for a blat on the old Norton Commando, and fast. As a Norton Commando owner and enthusiast, my goal here is to promote and give credit to those who keep the Norton name going.

It is more deserving to give credit to the Commando itself, for after all these years it continues to be respected. The original Commando designers like John Favill are those who deserve the credit for developing this incredible motorcycle.

The Norton Commando Roadster and Interstate of the late seventies, never died. Although the Norton Villiers factory dispersed the tradition lived on. Today Kenny Dreer in the USA is developing the new 952 CC Norton. What a great looking bike this is, and its engineering is still based on the original layout. It will be interesting to see how the new 952CC Norton does in todays tough motorcycle market. One thing is for sure, I would own one if I could afford it.