Norton Commando
Jerrydoe.com  Forum Home  Norton Commando Forum  Photos  [FAQ]  [Search]  [Memberlist]   
 [Profile]  [Check your private messages]  [Register]  [Log in] 
Rearsets

 
Post new topic   Reply to topic    Norton Commando Forum Index -> Norton Commando Motorcycles.
View previous topic :: View next topic  
Author Message
gypsy77360



Joined: 20 Jul 2004
Posts: 8
Location: Galveston,Texas,USA

PostPosted: Tue Aug 03, 2004 4:11 am    Post subject: Rearsets Reply with quote

I have a '74 John Player Norton . It is missing : R footpeg , L footpeg , L Brake pedal assembly.
What type of rearset controls are OEM?
Dunstal ?
Norman Hyde ?
Did Norton have an OEM rearset ?

The old bike was complete , less these parts and two cast aluminum fairing braces , which I also need.



Thanks for any info.
[/img]
Back to top
Ron L



Joined: 27 Feb 2004
Posts: 1152
Location: Ohio

PostPosted: Tue Aug 03, 2004 4:48 am    Post subject: Reply with quote

Gypsy77360,
The original JPN replicas had an OEM rearset pegs. They used the standard shifter turned backward and I believe a reversed camplate to keep the pattern one down, three up. Finding these will prove challenging. If you don't already have it, there was a Cycle magazine photo spread from 1974 which has many great shots of this model. It could prove useful in locating the correct parts. Also Fred Eaton at Old Britts has the parts supplement book for the JPN replica. It's pretty cheap at about $3. Probably no pictures, but part numbers. Good hunting.
Ron L
Back to top
illf8ed



Joined: 30 Dec 2003
Posts: 475

PostPosted: Tue Aug 03, 2004 4:59 am    Post subject: JPN rearsets Reply with quote

Whether or not Norton manufactured the rearsets or outsourced them, these were specific to the JPN. The left side has a short brake lever and peg mounted to an alloy back plate with a cone shaped post for the brake cable and an L shaped brake pedal stop screwed onto the back plate. The brake cable has a brake light switch incorporated similar to the early Commando front brake cables.

The right side is fairly simple with a folding peg attached to an alloy back plate that bolts to the "Z" plate. There is no linkage to the gear box, rather there is a reversed pedal/arm that is angle out from the gearbox at about 45 degrees. The gear lever is available from www.norvilmotorcycles.com

I jumped at the chance to buy a '74 JPN a couple of years ago. After a 2.5 hour ride each way to the Superbike races at Laguna Seca discovered this is the most uncomfortable machine I've ever ridden and sold it. I know I had the only JPN at Laguna Seca on the 30th anniversary of Peter William's 5th place finish (at Laguna Seca) during the '73 year of the Isle of Man victory for Norton. No one really noticed, but Kenny Dreers girls at least put some Norton stickers behind the wind screen.
Back to top
gypsy77360



Joined: 20 Jul 2004
Posts: 8
Location: Galveston,Texas,USA

PostPosted: Tue Aug 03, 2004 12:32 pm    Post subject: Ron L ,illf8ed Reply with quote

Thanks for the info . Have shifter , which looks like std. arm bolted on backwards , therefore only need footpeg. Left side only have "z"plate, need brake pedal and footpeg.
Back to top
illf8ed



Joined: 30 Dec 2003
Posts: 475

PostPosted: Tue Aug 03, 2004 8:16 pm    Post subject: JPN rearsets Reply with quote

part number 069512 on the www.norvilmotorcycle.com website is a very close example of the JPN rearsets. It uses the reversed gear shift lever. I have three of the JPN owners pamphlets I bought from norvil for about $0.50 each. The shift pattern in this pamphlet is one down the rest up, so the gearbox has the usual camplate...not reversed. That's how my '74 JPN was.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Norton Commando Forum Index -> Norton Commando Motorcycles. All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

The Unapproachable Norton Commando

At the end of 1967 the Norton Commando was announced.

The Norton Commando was greeted with a certain amount of scepticism because on first sight the commando appeared to comprise of the old Norton Dominator twin cylinder engine mounted at an inclined angle in a set of new cylinder parts.

It was not realized that the new Norton Commando Isolastic method of engine suspension damped out all engine vibration and produced a machine which had uncanny smoothness for a vertical twin. In due course the critics were silenced and the Norton Commando had the distinction of being regarded as the first of todays so called superbikes. There can be little doubt that the original design concept of the Norton Commando has proved correct, since comparatively few modifications of any real consequence have been made since production commenced during 1968.

Now nearly 40 years later Norton Commando riders like us are a breed of our own, and as far as we are concerned its still more fun to go for a blat on the old Norton Commando, and fast. As a Norton Commando owner and enthusiast, my goal here is to promote and give credit to those who keep the Norton name going.

It is more deserving to give credit to the Commando itself, for after all these years it continues to be respected. The original Commando designers like John Favill are those who deserve the credit for developing this incredible motorcycle.

The Norton Commando Roadster and Interstate of the late seventies, never died. Although the Norton Villiers factory dispersed the tradition lived on. Today Kenny Dreer in the USA is developing the new 952 CC Norton. What a great looking bike this is, and its engineering is still based on the original layout. It will be interesting to see how the new 952CC Norton does in todays tough motorcycle market. One thing is for sure, I would own one if I could afford it.