Norton Commando
Jerrydoe.com  Forum Home  Norton Commando Forum  Photos  [FAQ]  [Search]  [Memberlist]   
 [Profile]  [Check your private messages]  [Register]  [Log in] 
Introduction

 
Post new topic   Reply to topic    Norton Commando Forum Index -> Anything else Motorcycle Related
View previous topic :: View next topic  
Author Message
dampshop@msn.com
Guest





PostPosted: Fri Oct 07, 2005 7:09 pm    Post subject: Introduction Reply with quote

Hello:

My name is Frank Damp. Currently, I'm located in Anacortes, Washington State, USA (top LH corner, about 60 miles south of the Canadian border). I'm a Boeing retiree and currently work part time as a bus driver for the local transit Authority.

From spring 1967 to about Whitsuntide 1968, I worked as a development engineer at the N-V R&D facility at Marston Road, Wolverhampton. I was attached to Peter Inchley's Competition Department and reported to Mike Pollitt in engine test.

I was involved in a lot of the road and MIRA track testing of the Commando, and in the development of what became the AJS Stormer moto-cross machine.

I'd like to hear from any ex-Marston Raod folks who remember me.
Back to top
Dr_Hiller



Joined: 09 Oct 2004
Posts: 159
Location: Seattle, WA USA

PostPosted: Sat Oct 08, 2005 9:29 pm    Post subject: Reply with quote

Welcome to the asylum! Very Happy

I'm just down the way in Seattle. When I've got my bike roadworthy, maybe I'll run up the road and buy you a coffee or two in exchange for some oral history on the BritBike biz.

You may be able to answer a question I have. In Mick Walker's book, "Norton: The Racing Story," he states that 1973 JPS Nortons used AJS Stormer stanchions and yokes (triple trees), improving their high speed stability.

Since you've dealth with both, I'm hoping you might be able to shed some light on why this was an improvement over the Roadholder gear.
Back to top
Guest






PostPosted: Sun Oct 09, 2005 1:07 pm    Post subject: Reply with quote

David:

From the start of the Commando program, we didn't use the classic "Roadholder" front end. I think the forks were either Ceriani or a home-brewed equivalent. The bigger-diameter cast aluminum barrel with all the valving in it was attached to the spindle, and the high-tensile steel inner tubes attached to the headstock.

The Stormer used a similar set-up, but with smaller bits, as it was a much lighter bike.

I left N-V in June 1968, so I wasn't keeping tabs on things after that.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Norton Commando Forum Index -> Anything else Motorcycle Related All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

The Unapproachable Norton Commando

At the end of 1967 the Norton Commando was announced.

The Norton Commando was greeted with a certain amount of scepticism because on first sight the commando appeared to comprise of the old Norton Dominator twin cylinder engine mounted at an inclined angle in a set of new cylinder parts.

It was not realized that the new Norton Commando Isolastic method of engine suspension damped out all engine vibration and produced a machine which had uncanny smoothness for a vertical twin. In due course the critics were silenced and the Norton Commando had the distinction of being regarded as the first of todays so called superbikes. There can be little doubt that the original design concept of the Norton Commando has proved correct, since comparatively few modifications of any real consequence have been made since production commenced during 1968.

Now nearly 40 years later Norton Commando riders like us are a breed of our own, and as far as we are concerned its still more fun to go for a blat on the old Norton Commando, and fast. As a Norton Commando owner and enthusiast, my goal here is to promote and give credit to those who keep the Norton name going.

It is more deserving to give credit to the Commando itself, for after all these years it continues to be respected. The original Commando designers like John Favill are those who deserve the credit for developing this incredible motorcycle.

The Norton Commando Roadster and Interstate of the late seventies, never died. Although the Norton Villiers factory dispersed the tradition lived on. Today Kenny Dreer in the USA is developing the new 952 CC Norton. What a great looking bike this is, and its engineering is still based on the original layout. It will be interesting to see how the new 952CC Norton does in todays tough motorcycle market. One thing is for sure, I would own one if I could afford it.