Norton Commando
Jerrydoe.com  Forum Home  Norton Commando Forum  Photos  [FAQ]  [Search]  [Memberlist]   
 [Profile]  [Check your private messages]  [Register]  [Log in] 
Clip-on fitting

 
Post new topic   Reply to topic    Norton Commando Forum Index -> Norton Commando Motorcycles.
View previous topic :: View next topic  
Author Message
Guest






PostPosted: Mon Sep 27, 2004 12:42 pm    Post subject: Clip-on fitting Reply with quote

Guys, looking to see If you might have any Ideas on my issue here.
Just installed a set of Tomaselli headlight brackets and Tomaselli adjustible clipons.
The headlight brackets fit nice and snug b/c of the rubber grommet it's made up of around the fork.
I've installed the clip ons and even though they're the correct MM size, when fully tightened there's just engough play there for them to twist around...not much of a gap, but too much.
I'm guessing I'll have to put some kind of rubber sleeve/strips in there to make it fit. But being such a small gap It'll be hard to find something common to use.
Maybe a bicycle tire?
Any other ideas on how to make it fit correctly?
I'm not as concerned with the vertical movement, b/c the rubber headlight brackets are below providing a solid stop, but the twisting is definately an issue.
-thanks
Back to top
Jason Curtiss



Joined: 14 Jun 2003
Posts: 667
Location: HOUSTON, TEXAS

PostPosted: Mon Sep 27, 2004 2:43 pm    Post subject: Reply with quote

Guest,

Try using some brass shim stock to take up the gap. This stuff is available in various thicknesses and you can get it at most auto parts and hardware stores.

Regards,

Jason
Back to top
ewee



Joined: 01 Oct 2004
Posts: 1
Location: Costa Mesa

PostPosted: Fri Oct 01, 2004 8:18 pm    Post subject: Clip-on shims Reply with quote

My Tomaselli's came with aluminum/or steel shims of various thickesses. Do not overtighten the clip on without the right shim. It will crack the clip on! A scary thing if it happens underway.

I imagine that brass would work even better as it will deform a bit.

Good luck
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Norton Commando Forum Index -> Norton Commando Motorcycles. All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

The Unapproachable Norton Commando

At the end of 1967 the Norton Commando was announced.

The Norton Commando was greeted with a certain amount of scepticism because on first sight the commando appeared to comprise of the old Norton Dominator twin cylinder engine mounted at an inclined angle in a set of new cylinder parts.

It was not realized that the new Norton Commando Isolastic method of engine suspension damped out all engine vibration and produced a machine which had uncanny smoothness for a vertical twin. In due course the critics were silenced and the Norton Commando had the distinction of being regarded as the first of todays so called superbikes. There can be little doubt that the original design concept of the Norton Commando has proved correct, since comparatively few modifications of any real consequence have been made since production commenced during 1968.

Now nearly 40 years later Norton Commando riders like us are a breed of our own, and as far as we are concerned its still more fun to go for a blat on the old Norton Commando, and fast. As a Norton Commando owner and enthusiast, my goal here is to promote and give credit to those who keep the Norton name going.

It is more deserving to give credit to the Commando itself, for after all these years it continues to be respected. The original Commando designers like John Favill are those who deserve the credit for developing this incredible motorcycle.

The Norton Commando Roadster and Interstate of the late seventies, never died. Although the Norton Villiers factory dispersed the tradition lived on. Today Kenny Dreer in the USA is developing the new 952 CC Norton. What a great looking bike this is, and its engineering is still based on the original layout. It will be interesting to see how the new 952CC Norton does in todays tough motorcycle market. One thing is for sure, I would own one if I could afford it.