Norton Commando
Jerrydoe.com  Forum Home  Norton Commando Forum  Photos  [FAQ]  [Search]  [Memberlist]   
 [Profile]  [Check your private messages]  [Register]  [Log in] 
What size rims?

 
Post new topic   Reply to topic    Norton Commando Forum Index -> Norton Commando Motorcycles.
View previous topic :: View next topic  
Author Message
Irradiated.



Joined: 18 Jan 2004
Posts: 16

PostPosted: Mon Sep 20, 2004 5:02 am    Post subject: What size rims? Reply with quote

This summer I have certainly joined the ranks of Norton owners the world over. Take a nice long ride, rectify a problem. Take a ride, rectify a problem. Mostly simple things, but nagging just the same.
I have two questions. First, my rims are in poor condition and need replacing. I intend on having new alloy rims with stainless steel spokes built this winter. Does anyone recommend a particular brand of rim, and what size is best for the front. I originally planned on going with 18" F and R, but a gentleman I called for an estimate said I should stick with a 19" on the front. Opinions?
Next question. My cylinder head gasket is leaking and I'd like to replace it this winter also. How difficult of a job is this with the engine in the frame? I realize that this question is relative, but I still appreciate any advice. While the head is off I'm considering having it gone through. Can anyone recommend a good shop here in the U.S? Thank you for any help you can offer.
Chuck
Back to top
illf8ed



Joined: 30 Dec 2003
Posts: 474

PostPosted: Mon Sep 20, 2004 7:50 pm    Post subject: rim sizes Reply with quote

See Norbsa's string about Tire Sizes. The URL has an article that says stick with the 19" front and back for most Commando riding. I go along with this, but will probably lace up and extra rear hub with an 18" WM3 rim just to see how it works.

Getting the head off a Commando while the engine is in the frame is a trick operation. The pushrods have to be pushed way up into the head to provide clearance then the head is rotated backward then out sideways. It's pretty difficult even when you've done it before, but is possible. Read Commando Service Notes from the NOC.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Norton Commando Forum Index -> Norton Commando Motorcycles. All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

The Unapproachable Norton Commando

At the end of 1967 the Norton Commando was announced.

The Norton Commando was greeted with a certain amount of scepticism because on first sight the commando appeared to comprise of the old Norton Dominator twin cylinder engine mounted at an inclined angle in a set of new cylinder parts.

It was not realized that the new Norton Commando Isolastic method of engine suspension damped out all engine vibration and produced a machine which had uncanny smoothness for a vertical twin. In due course the critics were silenced and the Norton Commando had the distinction of being regarded as the first of todays so called superbikes. There can be little doubt that the original design concept of the Norton Commando has proved correct, since comparatively few modifications of any real consequence have been made since production commenced during 1968.

Now nearly 40 years later Norton Commando riders like us are a breed of our own, and as far as we are concerned its still more fun to go for a blat on the old Norton Commando, and fast. As a Norton Commando owner and enthusiast, my goal here is to promote and give credit to those who keep the Norton name going.

It is more deserving to give credit to the Commando itself, for after all these years it continues to be respected. The original Commando designers like John Favill are those who deserve the credit for developing this incredible motorcycle.

The Norton Commando Roadster and Interstate of the late seventies, never died. Although the Norton Villiers factory dispersed the tradition lived on. Today Kenny Dreer in the USA is developing the new 952 CC Norton. What a great looking bike this is, and its engineering is still based on the original layout. It will be interesting to see how the new 952CC Norton does in todays tough motorcycle market. One thing is for sure, I would own one if I could afford it.