Norton Commando
Jerrydoe.com  Forum Home  Norton Commando Forum  Photos  [FAQ]  [Search]  [Memberlist]   
 [Profile]  [Check your private messages]  [Register]  [Log in] 
'72 roadster seat restoration

 
Post new topic   Reply to topic    Norton Commando Forum Index -> Norton Commando Motorcycles.
View previous topic :: View next topic  
Author Message
illf8ed



Joined: 30 Dec 2003
Posts: 472

PostPosted: Fri Sep 03, 2004 7:31 am    Post subject: '72 roadster seat restoration Reply with quote

Six years ago when I restored my combat roadster I used a seat cover kit from England and the original foam. Since the Commando hadn't been used for 20 years I thought the foam was probably ok. It gets a little hard after about an hour and I'm thinking about replacing the foam now. Does anyone have good luck with some supplier's aftermarket foam? I tried Leighton in England for my '61 ES2, but it was a bit over stuffed and didn't look quite right. I was told Leighton was the best available.

I'm not really happy with the aftermarket cover either and plan to use the seat top from the original cover that's in very good condition then add the side pieces in new nagahyde.

The other option is buy a Corbin gunfighter. I'd like to hear opinions on that as well.

Thanks,
Back to top
norbsa48503



Joined: 07 Apr 2004
Posts: 995
Location: Flint, Michigan

PostPosted: Fri Sep 03, 2004 8:22 am    Post subject: Reply with quote

I am told that these guys will work with you to create a seat that is just right. I have seen thier work and the gel pack can transform the bike without changing the look. I run the Fastback seats and like them a lot but if I was running a Roadster this is the way to go. http://www.saddlemen.com/customsaddles.html norbsa
Back to top
Gene
Guest





PostPosted: Sat Sep 04, 2004 4:55 pm    Post subject: Reply with quote

http://www.ppseat.co.uk/

Ordered seat foam with gel insert for my '74 Interstate. Very pleased with the product, although their communication skills leave a bit to be desired. Could not detect any difference in the form from my original. Re-covered with a Norvil cover professionally installed (local upholstery shop...they used a few pop rivets to keep it tight). Beautiful original look.

Hope this helps.

Gene USA
Back to top
Ron L



Joined: 27 Feb 2004
Posts: 1101
Location: Ohio

PostPosted: Tue Sep 07, 2004 3:51 am    Post subject: Reply with quote

I have a Corbin on my 750 Roadster and like it a lot. The lines of the seat flow well with a Roadster tank. It feels hard at first, but is wide and gives better support, so less butt fatigue. It puts the riding position further rearward, where I usually rode with the stock seat anyway. You lose the two up capability, but I always found that uncomfortable on a Roadster. Much better on an Interstate.
A friend sent his Interstate seat to Sargent and after a discussion on his size, riding style, etc. they rebuilt his seat to suit. He's very happy. They also rebuilt a friend's 620 KTM seat when he converted it from an enduro to a street/Supermoto ride. He's also very happy.
YMMV
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Norton Commando Forum Index -> Norton Commando Motorcycles. All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

The Unapproachable Norton Commando

At the end of 1967 the Norton Commando was announced.

The Norton Commando was greeted with a certain amount of scepticism because on first sight the commando appeared to comprise of the old Norton Dominator twin cylinder engine mounted at an inclined angle in a set of new cylinder parts.

It was not realized that the new Norton Commando Isolastic method of engine suspension damped out all engine vibration and produced a machine which had uncanny smoothness for a vertical twin. In due course the critics were silenced and the Norton Commando had the distinction of being regarded as the first of todays so called superbikes. There can be little doubt that the original design concept of the Norton Commando has proved correct, since comparatively few modifications of any real consequence have been made since production commenced during 1968.

Now nearly 40 years later Norton Commando riders like us are a breed of our own, and as far as we are concerned its still more fun to go for a blat on the old Norton Commando, and fast. As a Norton Commando owner and enthusiast, my goal here is to promote and give credit to those who keep the Norton name going.

It is more deserving to give credit to the Commando itself, for after all these years it continues to be respected. The original Commando designers like John Favill are those who deserve the credit for developing this incredible motorcycle.

The Norton Commando Roadster and Interstate of the late seventies, never died. Although the Norton Villiers factory dispersed the tradition lived on. Today Kenny Dreer in the USA is developing the new 952 CC Norton. What a great looking bike this is, and its engineering is still based on the original layout. It will be interesting to see how the new 952CC Norton does in todays tough motorcycle market. One thing is for sure, I would own one if I could afford it.