| View previous topic :: View next topic |
| Author |
Message |
Alan W
Joined: 05 Apr 2006 Posts: 17 Location: Oxford, England
|
Posted: Thu Jun 05, 2008 3:41 am Post subject: Swing arm mod |
|
|
Hi everyone
I currently have my swinging arm off my 850 Mk2A due to sloppy bushes. I have got new standard size spindle & bushes to install, I should probably have got the oversize spindle but as I have only got simple tools and no expanding reamer I was hoping all would be OK, but there is just a hint of movement on the spindle loosely pushed in the tube before I nip up the top bolt.
I was wondering if anyone knows if the parts for Heinz Kegler clamp mod can be sourced in the UK, and if so where/who, as this would solve the problem nice and simply once and for all.
Here's hoping!
Alan |
|
| Back to top |
|
 |
Per G
Joined: 07 Apr 2008 Posts: 65 Location: Sweden
|
Posted: Thu Jun 05, 2008 4:05 am Post subject: |
|
|
Hi Alan,
I recently did the same thing on my MK2a. Using standard size spindle and new bushes. Mine was a good fit in the "tube" but I was told I could use some stock shim to take up any clearance with. I'm not sure if that's a good recommendation but depending on situation (access of tooling) it might be one way to fix it if.
I also did fit Heinz kit but I had to order it from the U.S.
Regards,
Per |
|
| Back to top |
|
 |
Alan W
Joined: 05 Apr 2006 Posts: 17 Location: Oxford, England
|
Posted: Thu Jun 05, 2008 4:16 am Post subject: |
|
|
| Per G wrote: | ....I also did fit Heinz kit but I had to order it from the U.S.
|
Thanks Per, who did you order it from in the States, did it take long to get it sent over?
Alan |
|
| Back to top |
|
 |
BrianK
Joined: 14 Jun 2007 Posts: 328 Location: Boston, MA USA
|
Posted: Thu Jun 05, 2008 6:25 am Post subject: |
|
|
Heinz sells them directly. I contacted him via email, got a prompt response, sent him a money order ($75 I think) - he doesn't do PayPal - and received the part in just a couple days.
I can dig out his email address if you need it. |
|
| Back to top |
|
 |
BrianK
Joined: 14 Jun 2007 Posts: 328 Location: Boston, MA USA
|
|
| Back to top |
|
 |
Per G
Joined: 07 Apr 2008 Posts: 65 Location: Sweden
|
Posted: Thu Jun 05, 2008 6:51 am Post subject: |
|
|
That's how I got in touch with him!
Forgot to mention that I had wobbel (spelling?) problems, especially with sidewind until I fixed the swing, now it's solid
(actually it's super solid now, sits on a box waiting for the gearbox to be assembled after a layshaft bearing failure last week)
/Per |
|
| Back to top |
|
 |
Alan W
Joined: 05 Apr 2006 Posts: 17 Location: Oxford, England
|
Posted: Thu Jun 05, 2008 8:41 am Post subject: |
|
|
Thanks everyone, I have just pinged him an email so I will await to see if I get a response and let you know what the upshot is.
Cheers
Alan |
|
| Back to top |
|
 |
Ron L
Joined: 27 Feb 2004 Posts: 1064 Location: Ohio
|
Posted: Thu Jun 05, 2008 10:49 am Post subject: |
|
|
Heinz's mod is certainly the easiest, but if communication or shipping proves difficult, most industrial supply houses can sell you a couple of alloy steel two piece shaft collars. Drill and tap one half of the shell for a hardened bolt and then drill the spindle tube. Bolt the collar around the tube and tighten the hardened bolt against the spindle. Use a locknut to lock it against the clamp. You might also grind a little flat on the clamp before drilling and tapping to provide a good locking surface.
Don't get too long of a bolt as it must clear the swingarm. |
|
| Back to top |
|
 |
Alan W
Joined: 05 Apr 2006 Posts: 17 Location: Oxford, England
|
Posted: Mon Jun 30, 2008 1:27 pm Post subject: |
|
|
Hi everyone. Just an update on the Heinz Kegler collars as promised. Sent Heinz the dosh from this side of the pond and a week later I get an email confirming receipt and he has sent the collars off same day. A week or so later they are in my sticky mitts
Fitted them this weekend. Installation was straight forward, made easier as the swinging arm was off anyway, even tho' instructions said it could be done with spindle in
Now everything back together, and swinging arm is as tight as a badger's wotsit. Brilliant !
Thanks everyone, Alan |
|
| Back to top |
|
 |
Gino Rondelli
Joined: 03 Jan 2008 Posts: 39 Location: Perth Scotland
|
Posted: Tue Jul 01, 2008 11:03 am Post subject: |
|
|
I just completed the same job on my Mk1 850 with the pin in situ, easy job, worked a treat!  |
|
| Back to top |
|
 |
cash
Joined: 10 Nov 2006 Posts: 397 Location: west cumbria
|
Posted: Tue Jul 01, 2008 11:20 am Post subject: |
|
|
Years ago I saw one fitted with what looked like "U" bolt exhaust or lifting wire clamps (bulldog clamps I think). They crushed the sleeve onto the pin, the owner said it did the job. I wondered how the hell he would ever pull it apart.
Cash |
|
| Back to top |
|
 |
|
Norton Commando Forum by Corporate Pages Web hosting using phpbb
The Unapproachable Norton Commando
At the end of 1967 the Norton Commando was announced.
The Norton Commando was greeted with a certain amount of scepticism because on first sight the commando appeared to comprise of the old Norton Dominator twin cylinder engine mounted at an inclined angle in a set of new cylinder parts.
It was not realized that the new Norton Commando Isolastic method of engine suspension damped out all engine vibration and produced a machine which had uncanny smoothness for a vertical twin. In due course the critics were silenced and the Norton Commando had the distinction of being regarded as the first of todays so called superbikes. There can be little doubt that the original design concept of the Norton Commando has proved correct, since comparatively few modifications of any real consequence have been made since production commenced during 1968.
Now nearly 40 years later Norton Commando riders like us are a breed of our own, and as far as we are concerned its still more fun to go for a blat on the old Norton Commando, and fast. As a Norton Commando owner and enthusiast, my goal here is to promote and give credit to those who keep the Norton name going.
It is more deserving to give credit to the Commando itself, for after all these years it continues to be respected. The original Commando designers like John Favill are those who deserve the credit for developing this incredible motorcycle.
The Norton Commando Roadster and Interstate of the late seventies, never died. Although the Norton Villiers factory dispersed the tradition lived on. Today Kenny Dreer in the USA is developing the new 952 CC Norton. What a great looking bike this is, and its engineering is still based on the original layout. It will be interesting to see how the new 952CC Norton does in todays tough motorcycle market. One thing is for sure, I would own one if I could afford it.