Norton Commando
Jerrydoe.com  Forum Home  Norton Commando Forum  Photos  [FAQ]  [Search]  [Memberlist]   
 [Profile]  [Check your private messages]  [Register]  [Log in] 
Wheels and tyres???

 
Post new topic   Reply to topic    Norton Commando Forum Index -> Norton Commando Motorcycles.
View previous topic :: View next topic  
Author Message
AVickers
Guest





PostPosted: Sat Jun 12, 2004 7:42 pm    Post subject: Wheels and tyres??? Reply with quote

I bought a MKIII about 4 months ago and have been tinkering with this and that. Currently, it's down to all the nuts and bolts.

It had a very good front rim and I scored a very nice rear. I'm thinking of installing Avon SuperVenom Tyres 100/90s or 110/90s? Does anyone have any suggestions of a better tyre? I'm not all that concerned about wear, but I want something that's sticky (gumballs even).

Although original, these wheels are HEAVY. Thinking about something lighter, I have found a couple of extra hubs and am thinking of installing alloy rims w/ polished stainless spokes on them (19 on the front and an 18 on the rear).

What width rims and tyres should I consider? I'm thinking a 3" on the rear w/ a 130/80 and a 2.5 on the front w/ a 110/90???

I know clearance on the rear can be a problem w/ wider setups. Anybody know what the widest setup is?
Back to top
norbsa48503



Joined: 07 Apr 2004
Posts: 1034
Location: Flint, Michigan

PostPosted: Sun Jun 13, 2004 3:49 am    Post subject: Reply with quote

Hi Al, You need WM2 19's the alloy ones are now made by Ecell and can be got at www.buchananspokes.com. You can go 18 on the rear for wider tire choice. I did a 120 on the rear of the 72 and with a new chain adjisted forward I needed to shave the tire so it missed the chain guard. I later went to a 110 rear looks and works just as good. Note that WM2 or any WM number does not come out to inches. norbsa
WM2(1.85) X 18" - 32 holes REWM21832 $136.75
WM2(1.85) X 18" - 36 holes REWM21836 $136.75
WM2(1.85) X 18" - 40 holes REWM21840 $136.75

--------------------------------------------------------------------------------

WM2(1.85) X 19" - 32 holes REWM21932 $136.75
WM2(1.85) X 19" - 36 holes REWM21936 $136.75
WM2(1.85) X 19" - 40 holes REWM21940 $136.75

--------------------------------------------------------------------------------

WM2(1.85) X 20" - 36 holes REWM22036 $144.75
WM2(1.85) X 21" - 36 holes REWM22136 $156.25



WM3(2.15) X 18" - 32 holes REWM31832 $156.25
WM3(2.15) X 18" - 36 holes REWM31836 $156.25
WM3(2.15) X 18" - 40 holes REWM31840 $156.25

--------------------------------------------------------------------------------

WM3(2.15) X 19" - 32 holes REWM31932 $156.25
WM3(2.15) X 19" - 36 holes REWM31936 $156.25
WM3(2.15) X 19" - 40 holes REWM31940 $156.25
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Norton Commando Forum Index -> Norton Commando Motorcycles. All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

The Unapproachable Norton Commando

At the end of 1967 the Norton Commando was announced.

The Norton Commando was greeted with a certain amount of scepticism because on first sight the commando appeared to comprise of the old Norton Dominator twin cylinder engine mounted at an inclined angle in a set of new cylinder parts.

It was not realized that the new Norton Commando Isolastic method of engine suspension damped out all engine vibration and produced a machine which had uncanny smoothness for a vertical twin. In due course the critics were silenced and the Norton Commando had the distinction of being regarded as the first of todays so called superbikes. There can be little doubt that the original design concept of the Norton Commando has proved correct, since comparatively few modifications of any real consequence have been made since production commenced during 1968.

Now nearly 40 years later Norton Commando riders like us are a breed of our own, and as far as we are concerned its still more fun to go for a blat on the old Norton Commando, and fast. As a Norton Commando owner and enthusiast, my goal here is to promote and give credit to those who keep the Norton name going.

It is more deserving to give credit to the Commando itself, for after all these years it continues to be respected. The original Commando designers like John Favill are those who deserve the credit for developing this incredible motorcycle.

The Norton Commando Roadster and Interstate of the late seventies, never died. Although the Norton Villiers factory dispersed the tradition lived on. Today Kenny Dreer in the USA is developing the new 952 CC Norton. What a great looking bike this is, and its engineering is still based on the original layout. It will be interesting to see how the new 952CC Norton does in todays tough motorcycle market. One thing is for sure, I would own one if I could afford it.