Joined: 15 Jan 2008 Posts: 436 Location: Laredo (south) Texas
Posted: Fri Jan 18, 2008 10:45 am Post subject: Introduction
First post here, so I figured I'd better introduce myself.
I'm Paul Zuniga, from Laredo (south) Texas, and go by "GrandPaul" on most forums, "GrandPaulZ" on TriumphRat.Net due to a previous identity theft of my username. I am a past INOA member, as well as AMA, CMA, BIR, BMOA and several other alphabetically arranged, bike-related associations.
I've been into bikes for over 35 years, Britbikes for over 25 or so of those; in that time I've owned a few over 100 bikes. I've currently got a collection of bikes (40+), with a good bunch of Britbikes, and a decent little group of dry-framed unit Triumph Bonnevilles from 66 to 70. I raced my rookie season in AHRMA vintage roadracing on a '69 Bonnie last year, and hope to do 6 events this year. I do most of my own work, but farm out powdercoat, paint, chrome, machine work, etc., because my shop simply can't accommodate all that equipment and I'm not specifically trained to do those trades (although I do weld and bead blast besides all mechanical and electrical work).
As far as Nortons, I've got a '75 MkIII 850 which is non-typical in that it has never given me a problem with regards to the electric start. I also have two '70 Norton project bikes that have both frames powdercoated, and a box or two of new bits, just need to assemble them. I also recently committed to buying a '72 Combat that is nearly to the rolling stage, it has lots of go-fast (and stop-fast) goodies included.
I was invited over here by Chip, a current restoration client (72 Combat).
The only commercial plug I'll put in (by way of introduction) is that I am the proprietor of
Born Again Bikes, and I'll try to restrain any commercial content in my posts here, unless asked specifically and allowed by the board.
I have only read part of one thread here, so please allow me time to get "up to speed" as to the general atmosphere of this forum. Oh, by the way, in several years on the various on-line forums, my politics and/or religion have either been brought in or dragged in to the conversation; I have promised myself to do better and would appreciate help in this area by asking that if you have any personal questions for me, let's take it off the board.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
At the end of 1967 the Norton Commando was announced.
The Norton Commando was greeted with a certain amount of scepticism because on first sight the commando appeared to comprise of the old Norton Dominator twin cylinder engine mounted at an inclined angle in a set of new cylinder parts.
It was not realized that the new Norton Commando Isolastic method of engine suspension damped out all engine vibration and produced a machine which had uncanny smoothness for a vertical twin. In due course the critics were silenced and the Norton Commando had the distinction of being regarded as the first of todays so called superbikes. There can be little doubt that the original design concept of the Norton Commando has proved correct, since comparatively few modifications of any real consequence have been made since production commenced during 1968.
Now nearly 40 years later Norton Commando riders like us are a breed of our own, and as far as we are concerned its still more fun to go for a blat on the old Norton Commando, and fast. As a Norton Commando owner and enthusiast, my goal here is to promote and give credit to those who keep the Norton name going.
It is more deserving to give credit to the Commando itself, for after all these years it continues to be respected. The original Commando designers like John Favill are those who deserve the credit for developing this incredible motorcycle.
The Norton Commando Roadster and Interstate of the late seventies, never died. Although the Norton Villiers factory dispersed the tradition lived on. Today Kenny Dreer in the USA is developing the new 952 CC Norton. What a great looking bike this is, and its engineering is still based on the original layout. It will be interesting to see how the new 952CC Norton does in todays tough motorcycle market. One thing is for sure, I would own one if I could afford it.