Norton Commando
Jerrydoe.com  Forum Home  Norton Commando Forum  Photos  [FAQ]  [Search]  [Memberlist]   
 [Profile]  [Check your private messages]  [Register]  [Log in] 
Magneto cut out

 
Post new topic   Reply to topic    Norton Commando Forum Index -> Other Classic Motorcyles
View previous topic :: View next topic  
Author Message
millard



Joined: 06 Mar 2007
Posts: 87
Location: Hamble, UK

PostPosted: Sun Jun 03, 2007 2:28 pm    Post subject: Magneto cut out Reply with quote

Can anyone explain how to fit a cut out to the magneto?
Presumably it would be a short to the points somehow, but where? how? anyone got a diagram/link/article they can share please?
I want to fit one to my ES2.
thanks
millard
Back to top
not-ron



Joined: 29 Oct 2006
Posts: 46
Location: Opington, Kent, UK.

PostPosted: Tue Jul 03, 2007 10:56 am    Post subject: Reply with quote

The only way I have seen this done is by fitting the end cap on the mag that has and earth pole through the middle and then passing the wire through a switch to earth....someone I know has linked this to his tap on the bottom of the oil tank. The tap prevents wet sumping but you must remember to turn it on before startng so to prevent you starting the bike you have a micro switch which indexes on the tap lever i.e to earth in the off position earth broken tap in the on position.......hope this is clear it came about after a wrecked Velocette Venom engine but it did do 25 miles without oil Shocked
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Norton Commando Forum Index -> Other Classic Motorcyles All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

The Unapproachable Norton Commando

At the end of 1967 the Norton Commando was announced.

The Norton Commando was greeted with a certain amount of scepticism because on first sight the commando appeared to comprise of the old Norton Dominator twin cylinder engine mounted at an inclined angle in a set of new cylinder parts.

It was not realized that the new Norton Commando Isolastic method of engine suspension damped out all engine vibration and produced a machine which had uncanny smoothness for a vertical twin. In due course the critics were silenced and the Norton Commando had the distinction of being regarded as the first of todays so called superbikes. There can be little doubt that the original design concept of the Norton Commando has proved correct, since comparatively few modifications of any real consequence have been made since production commenced during 1968.

Now nearly 40 years later Norton Commando riders like us are a breed of our own, and as far as we are concerned its still more fun to go for a blat on the old Norton Commando, and fast. As a Norton Commando owner and enthusiast, my goal here is to promote and give credit to those who keep the Norton name going.

It is more deserving to give credit to the Commando itself, for after all these years it continues to be respected. The original Commando designers like John Favill are those who deserve the credit for developing this incredible motorcycle.

The Norton Commando Roadster and Interstate of the late seventies, never died. Although the Norton Villiers factory dispersed the tradition lived on. Today Kenny Dreer in the USA is developing the new 952 CC Norton. What a great looking bike this is, and its engineering is still based on the original layout. It will be interesting to see how the new 952CC Norton does in todays tough motorcycle market. One thing is for sure, I would own one if I could afford it.