Norton Commando
Jerrydoe.com  Forum Home  Norton Commando Forum  Photos  [FAQ]  [Search]  [Memberlist]   
 [Profile]  [Check your private messages]  [Register]  [Log in] 
Rear Chain Oiler

 
Post new topic   Reply to topic    Norton Commando Forum Index -> Norton Commando Motorcycles.
View previous topic :: View next topic  
Author Message
Chuck



Joined: 07 Mar 2004
Posts: 3

PostPosted: Sun Mar 07, 2004 8:08 am    Post subject: Rear Chain Oiler Reply with quote

For some reason the last time I reattached the oil tank to my 1974 Commando I had a terrible time getting everything lined up mainly due to the rear chain oiler attachment. I've been meaning to plug it up for years.
I'm just looking for ideas on how to do it.

I have aftermarket rims on the bike, which allowed me to add a rear disk brake. Unfortunately the front speedometer drive no longer fits. So I haven't had a speedometer for the last 15+ years. I've seen bikes at rallies with non stock drives attached to either the front or bike wheels. Has anyone dealt with this situation?
Back to top
illf8ed



Joined: 30 Dec 2003
Posts: 472

PostPosted: Mon Mar 08, 2004 6:24 am    Post subject: chain oiler plug Reply with quote

Chuck,

I can't really help with the speedo drive. Regarding plugging the chain oiler, I removed all the tubing from the tank and used a rubber vacuum cap. These can be bought from auto parts stores, usually as a kit with many diameter caps. They are black rubber and look like a piece of tubing with a bull nose at one end. Put the cap over the metal chain oiler tube on the oil tank and use a hose clamp to make sure it doesn't come off. Throw the chain oiler in a plastic bag and keep it for the day when you or someone whats a completely original restoration.
Back to top
Chuck



Joined: 07 Mar 2004
Posts: 3

PostPosted: Mon Mar 08, 2004 6:24 pm    Post subject: Reply with quote

David

Thanks

Chuck
Back to top
scorpio
Guest





PostPosted: Wed Mar 24, 2004 8:00 pm    Post subject: Reply with quote

My Commando came with the rear oiler disconnected. I found that someone had put a ball bearing into the feed line after cutting it off. I have ridden many miles on my bike and never had so much as a drop of oil come out of the oiler tube. hope this helps
Back to top
Chuck



Joined: 07 Mar 2004
Posts: 3

PostPosted: Sun Apr 04, 2004 5:02 am    Post subject: Reply with quote

Thanks for the info. It's snowing again here in Vermont so I don't have much enthusiasm for working on the bike. I'll get going one of these days
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Norton Commando Forum Index -> Norton Commando Motorcycles. All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

The Unapproachable Norton Commando

At the end of 1967 the Norton Commando was announced.

The Norton Commando was greeted with a certain amount of scepticism because on first sight the commando appeared to comprise of the old Norton Dominator twin cylinder engine mounted at an inclined angle in a set of new cylinder parts.

It was not realized that the new Norton Commando Isolastic method of engine suspension damped out all engine vibration and produced a machine which had uncanny smoothness for a vertical twin. In due course the critics were silenced and the Norton Commando had the distinction of being regarded as the first of todays so called superbikes. There can be little doubt that the original design concept of the Norton Commando has proved correct, since comparatively few modifications of any real consequence have been made since production commenced during 1968.

Now nearly 40 years later Norton Commando riders like us are a breed of our own, and as far as we are concerned its still more fun to go for a blat on the old Norton Commando, and fast. As a Norton Commando owner and enthusiast, my goal here is to promote and give credit to those who keep the Norton name going.

It is more deserving to give credit to the Commando itself, for after all these years it continues to be respected. The original Commando designers like John Favill are those who deserve the credit for developing this incredible motorcycle.

The Norton Commando Roadster and Interstate of the late seventies, never died. Although the Norton Villiers factory dispersed the tradition lived on. Today Kenny Dreer in the USA is developing the new 952 CC Norton. What a great looking bike this is, and its engineering is still based on the original layout. It will be interesting to see how the new 952CC Norton does in todays tough motorcycle market. One thing is for sure, I would own one if I could afford it.