Welcome to the Access Norton Forum. Login as a VIP member to remove the advertising banners.


Carburation

Carburation

Postby chrisf1 » Mon Nov 14, 2016 2:06 pm

Hi again everyone I am looking for some advice on the monobloc carbs that were originally running my bike when it was 650cc, the carbs are un-numbered so where should I measure to identify and also I have uprated the engine with a 750cc Morgo kit and what changes would be recommended to account for this it is running e3134 cams exhaust and inlet and boyer ignition advice gratefully received many thanks Chris

chrisf1
Posts: 125
Joined: Sun Aug 23, 2015 4:22 am

Re: Carburation

Postby Triton Thrasher » Tue Nov 15, 2016 11:02 am

Ask on the Triumph forum at http://www.britbike.com

Measure the diameter of the big hole where the carb bolts onto the manifold.

Look at the numbers stamped on the jets. Renew the needle jets.

Follow the well-publicised Amal tuning procedure. It's probably in your Triumph manual.
User avatar

Triton Thrasher
Posts: 1055
Joined: Tue Feb 10, 2009 7:27 am
Location: Thurso, Scotland

Re: Carburation

Postby grandpaul » Tue Nov 15, 2016 7:36 pm

Carbs are not stamped on the tops of the bolt-up flanges?
GrandPaul
author "Old Bikes"
too many bikes to list, including:
952 Prototype, MkIII Interstate, Combat Dunstall, Triton
User avatar
Access Norton VIP Paying Member
grandpaul
VIP MEMBER
Posts: 9658
View Photo Album - Images: 30
Joined: Tue Jan 15, 2008 1:11 pm
Location: Laredo (south) Texas

Re: Carburation

Postby chrisf1 » Wed Nov 16, 2016 1:05 am

No they are not stamped

chrisf1
Posts: 125
Joined: Sun Aug 23, 2015 4:22 am


Return to Triton

Who is online

Users browsing this forum: No registered users and 0 guests