Welcome to the Access Norton Forum. Login as a VIP member to remove the advertising banners.


961 MANUALS

Modern 961 Norton Commando Motorcycles

Re: 961 MANUALS

Postby richard-7 » Wed Jun 07, 2017 6:19 pm

Sent.
1977 Suzuki GT500 2-stroke Cafe Racer
2014 Norton 961 SE #112
My Flickr Account Photos
ONE07 Flickr Account Photos
iStock Motorcycle Pics
User avatar

richard-7
Posts: 996
Joined: Mon Feb 24, 2014 11:31 am
Location: Southern Ontario, Canada

Re: 961 MANUALS

Postby luvolbikes » Thu Jun 08, 2017 9:25 am

Thanks for doing this work to help educate the loyal but somewhat perplexed Norton enthusiasts like myself. I would love to receive the 1. Cylinder head torque 2. Tranny vent 3. Oil change 4. throttle control and 5. Oil in airbox sections for now. Look forward to the completed manual in the future. John

luvolbikes
Posts: 6
Joined: Mon May 22, 2017 6:49 am

Re: 961 MANUALS

Postby luvolbikes » Thu Jun 08, 2017 9:30 am

Jfahlberg@aol.com regarding my recent post requesting the service manual

luvolbikes
Posts: 6
Joined: Mon May 22, 2017 6:49 am

Re: 961 MANUALS

Postby richard-7 » Thu Jun 08, 2017 3:02 pm

Sent!
1977 Suzuki GT500 2-stroke Cafe Racer
2014 Norton 961 SE #112
My Flickr Account Photos
ONE07 Flickr Account Photos
iStock Motorcycle Pics
User avatar

richard-7
Posts: 996
Joined: Mon Feb 24, 2014 11:31 am
Location: Southern Ontario, Canada

Re: 961 MANUALS

Postby richard-7 » Thu Jun 08, 2017 3:02 pm

Sent!
1977 Suzuki GT500 2-stroke Cafe Racer
2014 Norton 961 SE #112
My Flickr Account Photos
ONE07 Flickr Account Photos
iStock Motorcycle Pics
User avatar

richard-7
Posts: 996
Joined: Mon Feb 24, 2014 11:31 am
Location: Southern Ontario, Canada

Re: 961 MANUALS

Postby luvolbikes » Thu Jun 08, 2017 4:56 pm

I received the service emails and thank you kindly. Looking forward to reading through them. John




i

luvolbikes
Posts: 6
Joined: Mon May 22, 2017 6:49 am

Re: 961 MANUALS

Postby nopdog » Fri Jun 09, 2017 12:42 am

Hi Richard
If you have time I would love a set of your manuals.
simonhayes@hotmail.com

Thankyou
Simon

nopdog
Posts: 22
Joined: Mon Apr 24, 2017 8:51 pm
Location: Bawley Point NSW Australia

Re: 961 MANUALS

Postby richard-7 » Fri Jun 09, 2017 8:37 am

nopdog wrote:Hi Richard
If you have time I would love a set of your manuals.
sixxxxxx@hotxxxl.com

Thankyou
Simon



Sent. :mrgreen:
1977 Suzuki GT500 2-stroke Cafe Racer
2014 Norton 961 SE #112
My Flickr Account Photos
ONE07 Flickr Account Photos
iStock Motorcycle Pics
User avatar

richard-7
Posts: 996
Joined: Mon Feb 24, 2014 11:31 am
Location: Southern Ontario, Canada

Re: 961 MANUALS

Postby caldwelp » Sun Jul 02, 2017 7:56 pm

Richard, I just purchased a 2016 Commando Sport. I would like to receive your workshop manual additions (PDF). My email is caldwelp@hotmail.com
Please tell where to send you a donation via PayPal. Thanks Peter Caldwell Long Beach, CA

caldwelp
Posts: 1
Joined: Mon Aug 25, 2014 6:32 pm

Re: 961 MANUALS

Postby richard-7 » Mon Jul 03, 2017 2:37 pm

Peter

Sent. -- and thank you for your support.

Richard
1977 Suzuki GT500 2-stroke Cafe Racer
2014 Norton 961 SE #112
My Flickr Account Photos
ONE07 Flickr Account Photos
iStock Motorcycle Pics
User avatar

richard-7
Posts: 996
Joined: Mon Feb 24, 2014 11:31 am
Location: Southern Ontario, Canada

Re: 961 MANUALS

Postby luvolbikes » Sat Aug 12, 2017 9:37 am

Hi Richard I'm about to do the head bolt torque, valve check on my 961. Have you been able to reuse the valve cover gaskets successfully? About 2000 miles on the bike. If so, do you recommend silicon sealant? Thanks for all the good work you do. John

luvolbikes
Posts: 6
Joined: Mon May 22, 2017 6:49 am

Re: 961 MANUALS

Postby richard-7 » Sat Aug 12, 2017 11:44 am

Be gentle and you'll be fine. Its a tough gasket.
1977 Suzuki GT500 2-stroke Cafe Racer
2014 Norton 961 SE #112
My Flickr Account Photos
ONE07 Flickr Account Photos
iStock Motorcycle Pics
User avatar

richard-7
Posts: 996
Joined: Mon Feb 24, 2014 11:31 am
Location: Southern Ontario, Canada

Previous

Return to Norton Commando 961 Motorcycles

Who is online

Users browsing this forum: pingu-nz and 3 guests