Welcome to the Access Norton Forum. Login as a VIP member to remove the advertising banners.

1969 BSA 650 cc thunderbolt crankshaft to bearing conversion

1969 BSA 650 cc thunderbolt crankshaft to bearing conversion

Postby luckyfreeman » Sun Jan 22, 2017 10:57 pm

Hello everybody I am looking for a machine shop preferably along east coast rte 95 or 84 to 684 to 81 to 64 into Richmond Va then anywhere along 95 They have to have expierience in rebuilding the used crankshaft back to stock factory rod bearings then after returning to stock making all modifications to accept SRM style bearings on crankshaft with out bushing and put needed oil holes and machine work to case halfs....Please somebody let me know where I can get this done ...I simply do not want to use bushings on crankshaft...you can contact me @ twofirst1@gmail.com or text me @ 978-314-8794 any help will be greatly appreciated...

Posts: 2
Joined: Sun Jan 15, 2017 7:46 pm

Re: 1969 BSA 650 cc thunderbolt crankshaft to bearing conver

Postby nortriubuell » Sat Mar 18, 2017 3:57 am

If I had a BSA, Frank Deihls is where I would go. And ... I would'nt run a BSA A65 without the bearing conversion either. Cheers.

http://www.franksclassiccycle.com/vinta ... le-repair/
70 Triumph 650 chopper
73 Norton 750 "bitsa"
74 Norton 850 project
76 Triumph w/69 650 motor
80 Kaw KZ1000
99 Buell Cyclone

Posts: 574
View Photo Album - Images: 6
Joined: Sun Aug 29, 2010 5:34 pm
Location: Yulee, Florida

Return to BSA

Who is online

Users browsing this forum: No registered users and 1 guest