Welcome to the Access Norton Forum. Login as a VIP member to remove the advertising banners.


1967 G15CS rear fender mounting hardware

Norton Models (not Commando or P11)

1967 G15CS rear fender mounting hardware

Postby APRRSV » Fri Jul 21, 2017 1:40 pm

Hey all,
I'm working on a basket case 1967 G15CS. It is missing the rear fender and all hardware to mount it. In looking through the parts manual I see part # 030315 described as a rear loop which according to Walridge site is the the loop that bolts to the rear frame where the top shock mounts.
I also see part # 032256 described as a support tube. Can anyone tell me what the function of this part is and what it looks like? A picture would be fantastic.

Thanks,
Ed

APRRSV
Posts: 205
Joined: Sun Jun 26, 2016 6:47 pm
Location: Northern Virginia

Re: 1967 G15CS rear fender mounting hardware

Postby grandpaul » Fri Jul 21, 2017 2:45 pm

I made my own...

Image

Turns out the solid steel rods should start angling upwards almost as soon as they exit the lugs on the frame tube ends, then make the curve over the top.

Since I didn't have a photo to work from at the time, I just "winged it".
GrandPaul
author "Old Bikes"
too many bikes to list, including:
952 Prototype, MkIII Interstate, Combat Dunstall, Triton
User avatar
Access Norton VIP Paying Member
grandpaul
VIP MEMBER
Posts: 9743
View Photo Album - Images: 30
Joined: Tue Jan 15, 2008 1:11 pm
Location: Laredo (south) Texas

Re: 1967 G15CS rear fender mounting hardware

Postby grandpaul » Fri Jul 21, 2017 3:01 pm

Sorry, that last one was a P-11 Ranger.

This was an N15CS...

Image

Seat mounted on top after that...

Image

I believe it took a thick spacer between the seat tab and the rear fender, with a large washer under the fender.
GrandPaul
author "Old Bikes"
too many bikes to list, including:
952 Prototype, MkIII Interstate, Combat Dunstall, Triton
User avatar
Access Norton VIP Paying Member
grandpaul
VIP MEMBER
Posts: 9743
View Photo Album - Images: 30
Joined: Tue Jan 15, 2008 1:11 pm
Location: Laredo (south) Texas

Re: 1967 G15CS rear fender mounting hardware

Postby APRRSV » Fri Jul 21, 2017 3:24 pm

Thank you Grandpaul. The pictures you sent confirm that the 030315 rear loop in the photo on the Walridge site matches what you show.
However, I'm still puzzled about what the 032256 part # is and what it looks like.

Ed

APRRSV
Posts: 205
Joined: Sun Jun 26, 2016 6:47 pm
Location: Northern Virginia

Re: 1967 G15CS rear fender mounting hardware

Postby grandpaul » Sat Jul 22, 2017 8:33 am

That other part MIGHT be a flat, curved strip that goes over or under the fender, crossing from shock mount to shock mount.
GrandPaul
author "Old Bikes"
too many bikes to list, including:
952 Prototype, MkIII Interstate, Combat Dunstall, Triton
User avatar
Access Norton VIP Paying Member
grandpaul
VIP MEMBER
Posts: 9743
View Photo Album - Images: 30
Joined: Tue Jan 15, 2008 1:11 pm
Location: Laredo (south) Texas

Re: 1967 G15CS rear fender mounting hardware

Postby APRRSV » Sat Jul 22, 2017 3:49 pm

Thanks again, Grandpaul. Is that what I see in the first pic of your second post?

Ed

APRRSV
Posts: 205
Joined: Sun Jun 26, 2016 6:47 pm
Location: Northern Virginia

Re: 1967 G15CS rear fender mounting hardware

Postby grandpaul » Sun Jul 23, 2017 6:34 am

Might be. Let me see if I took another photo of that area closer up...
GrandPaul
author "Old Bikes"
too many bikes to list, including:
952 Prototype, MkIII Interstate, Combat Dunstall, Triton
User avatar
Access Norton VIP Paying Member
grandpaul
VIP MEMBER
Posts: 9743
View Photo Album - Images: 30
Joined: Tue Jan 15, 2008 1:11 pm
Location: Laredo (south) Texas


Return to Other Nortons

Who is online

Users browsing this forum: No registered users and 2 guests